Cisco Systems 100/200/300/400 specifications Before You Begin

C H A P T E R 4

Installing the Internet Streamer CDS Software and Initially Configuring a CDE

This chapter describes the initial installation of the Cisco Internet Streamer CDS Release 2.0-2.1 software application suite, and the initial configuration of the CDE. This chapter contains the following sections:

•Before You Begin, page 4-1

•Running the BIOS Setup Utility, page 4-2

•Installing the Software, page 4-13

•Initially Configuring a CDE, page 4-14

•Verifying the CDSM, page 4-15

Before You Begin

You need the following to perform the initial installation and configuration of the CDS:

•CDE100 or CDE200

•USB CD-ROM drive (for CDE200 only [provided])

•Internal IDE compact flash drive (pre-installed)

•Terminal server connection with the following parameters:

–9600 baud

–8 bits

–No parity

–Redirection After BIOS POST is off in CDE BIOS setup

–Console redirection enabled for COM1

•CDS image CD

•Network connection

Note On the CDE200, use the USB port to connect the USB CD-ROM drive. After the initial installation, remove the USB CD-ROM drive. The internal IDE compact flash drive becomes the boot drive for subsequent operations.

Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide

OL-13478-03 4-1