Cisco Systems 100/200/300/400 specifications Documentation section on

Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE

Verifying the CDSM

Step 3 From the CDSM Main menu, select the Devices tab. A list of all your registered Service Engines and Service Routers appears (see Figure 4-20).

Figure 4-20 Devices Page

Step 4 Verify that the devices you configured for your CDS network are listed.

Step 5 If a device is not listed, restart the CMS for that device by using either the console or Telnet connection and entering the following commands in global configuration mode:

CDE(config)# no cms enable

CDE(config)# cms enable

The installation is now complete. Refer to the Cisco Internet Streamer CDS 2.0-2.1 Software

Configuration Guide for information on configuring and using the CDS. See the “Related

Documentation” section on page 2-viii.

	Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03		4-17