Extron electronic manual Introduction, About This Manual, About the IPL T S Series Interface

Introduction

About This Manual

This manual describes the function, installation, configuration, and operation of the Extron IPL T S Series interface devices which are shown below.

About the IPL T S Series Interface

The Extron IPL T S Series interface devices integrate network connectivity into audio/video (A/V) systems. Installing an IPL T S Series interface into an A/V network gives users the ability to remotely monitor and control projectors, flat-panel displays, switchers, and other serially-controlled devices.

IPL T S1 control interface

•PN 60-801-81

•One bidrectional RS-232 serial port

•7.25 MB of available flash memory

•Low-profile form factor

•1.0 inch H x 4.3 inches W x 3.0 inches D (2.5 cm x 10.9 cm x 7.6 cm)

IPL T S2 control interface

•PN 60-544-81

•Two bidrectional RS-232, RS-422, or RS-485 serial ports

•7.25 MB of available flash memory

•1.7 inches H x 4.3 inches W x 3.0 inches D (4.3 cm x 10.9 cm x 7.6 cm)

IPL T S4 control interface

•PN 60-544-83

•Four bidirectional RS-232, RS-422, or RS-485 serial ports

•7.25 MB of available flash memory

•1.7 inches H x 4.3 inches W x 3.0 inches D (4.3 cm x 10.9 cm x 7.6 cm)

IPL T S6 control interface

•PN 60-544-84

•Six bidirectional RS-232, RS-422, or RS-485 serial ports

•7.25 MB of available flash memory

•1.7 inches H x 4.3 inches W x 3.0 inches D (4.3 cm x 10.9 cm x 7.6 cm)

1-2 IPL T S Series • Introduction