Specifications, Part Numbers, Accessories
Specifications
Ethernet control interface
Connectors | 1 female |
Data rate | |
Protocols | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet |
Default settings | Link speed and duplex level = autodetected |
| IP address = 192.168.254.254 |
| Subnet mask = 255.255.0.0 |
| Gateway = 0.0.0.0 |
| DHCP = off |
Web server | Up to 200 simultaneous sessions |
| 7.25 MB nonvolatile user memory |
Program control | Extron Simple Instruction Set (SIS™) |
Global Viewer requirements | Microsoft® Internet Explorer ver. 6 or higher |
Serial control interface
Quantity/type |
|
|
IPL T S1 | 1 | |
IPL T S2 | 2 | |
IPL T S4 | 4 | |
IPL T S6 | 2 | |
| 4 | |
Connectors |
|
|
IPL T S1 | 1 male | |
IPL T S2 | 2 male | |
IPL T S6 | 2 male | |
IPL T S4 | 4 male | |
Baud rate and protocol | 300 to 115200 baud | |
| Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity | |
Pin configurations |
|
|
Serial, |
|
|
2 | = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS | |
Serial, | ||
2 | = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS | |
2 | = | |
2&3 (tied together) = | ||
Serial, |
|
|
IPL T S2 | COM1: pin 1 = TX, 2 = RX, 3 = GND | |
| COM2: pin 4 = TX, 5 = RX, 3 = GND | |
Serial, |
| |
IPL T S6 | COM3: pin 1 = TX, 2 = RX, 3 = GND | |
| COM4: pin 4 = TX, 5 = RX, 3 = GND | |
| COM5: pin 6 = TX, 7 = RX, 8 = GND | |
| COM6: pin 9 = TX, 10 = RX, 8 = GND |
General
Power | Supplied by an included external power supply |
External power supply | 100 VAC to 240 VAC, |
Power input requirements | 12 VDC, 0.5 A |
Temperature/humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Mounting |
|