Extron electronic IPL T S X!* X2%, X2, X2&, X2*CP WX! %2A X2% %2CX2 %2CX2, X2%, X2, X2&, X2

IPL T S Series • Communication and Control 4-7

Command	ASCII (Telnet)	URL Encoded (Web)	Response		Additional description
	(host to unit)	(host to unit)	(unit to host)
Configure	E X!* X2%, X2^, X2&, X2*CP}	WX! %2A X2% %2CX2^ %2CX2&	Cpn X!•CcpX2%, X2^, X2&,		Set baud rate (X2%), parity (X2^), data bits
parameters24		%2CX2*CP	X2* ]	(X2&), and stop bits (X2*) for port X!.
					X2% = 300, 600, 1200, 1800, 2400, 3600, 4800,
				7200, 9600, 14400, 19200, 28800, 38400, 57600,
				or 115200 baud.
					X2^ = parity (only the first letter is needed):
					Odd
					E	ven
					None (default)
					M		ark
					S		pace.
					X2& = data bits: 7, 8			(default = 8).
					X2* = stop bits: 1, 2			(default = 1).
Example:	E4*9600,N,8,1CP}	W4%2A9600%2CN%2C8%2C	Cpn4•Ccp9600,N,8,1]		Set the projector control port for 9600 baud,
		1CP			no parity, 8 data bits, and 1 stop bit.
View parameters	E X!CP}	W X!CP	X2%, X2^, X2&, X2( ]
Configure mode24	E X!*X2(CY}	WX!%2AX2(CY	CpnX!•CtyX2)]
View mode	E X!CY}	WX!CY	X2(]
Configure flow	E X!*X3),X3!CF}	WX!%2AX3)%2CX3!CF	CpnX!•CflX3), X3!]
control
View flow control	E X!CF}	WX!CF	X3), X3!]
Configure receive	E X!*X1&*X2)*X2#*X2!CE}	WX!%2AX1&%2AX2)%2AX2#	CpnX!•CceX1& , X2) , X2# ,		Set the time to wait (X1& = waiting time in
timeout24		%2AX2!CE	X2! ]	tens of ms until receipt of the first response
				character before terminating the receive
				operation, X2) = waiting time in
					tens of ms between characters before
					terminating) and priority status
					(X2#: 0 = default, use send data string
					command parameters; 1 = use configure
					receive timeout command parameters) for
					port X!. X2! = #L or #D (see previous page).
					The response includes leading zeros.
View receive timeout	E X!CE}	WX!CE	X1& , X2) , X2# , X2! ]
Configure pass-thru	E X!*X5)*X5#*X2!CD}	WX!%2AX5)%2AX5#%2AX2!	CpnX!•CcdX5),X5#,X2!]
mode24		CD
Terminate pass-thru	E X!*0CD}	WX!%2A0CD	CpnX!•Ccd
mode24			00000,00000,00000L]