Extron electronic manual Mounting options, Rack mounting an IPL T S Series interface

Mounting options

All units are easily mounted in a rack, under a desk or podium, or on a projector mount.

Mounting kits and IPL T S Series device compatibility are shown in the table below.

Mounting Type

Kit PN

S1

S2

S4

S6

MBU 125 Under-desk mount	70-077-01	•
MBU 123 Under-furniture mount	70-212-01		•	•	•
PMK 200 Projector mount	70-077-04	•
PMK 100 Projector mount	70-217-01		•	•	•
RSU 129 1U 9.5-inch Deep	60-190-01	•	•	•	•
universal rack shelf
RSF 123 1U 3.5-inch Deep rack shelf	60-190-20	•	•	•	•

Rack mounting an IPL T S Series interface

The following rack mount kits are available:

•	PN 60-190-20	RSU 123	1U 3.5-inch Deep Rack Shelf Kit
•	PN 60-190-01	RSU 129	1U Universal Rack Shelf Kit
To rack mount an IPL T S Series unit:
1.	If present, remove the rubber feet from the bottom of the IPL T S unit.
2.	Secure the underside of the unit on the rack shelf with two 4-40 x 3/16-inch
	screws in opposite (diagonal) corners.
3.	Install additional unit(s) or blank panel(s) on the rack shelf as desired.

4.Insert the shelf into the rack at the desired location.

5.Secure the shelf to the rack using the supplied mounting screws.

IPL
TS2
R
1 COM
2
	®
100	IPL
LINK	TS2
ACT
	R	COM
	1
1U Rack Shelf	2
			100
			®
			LINK
			ACT
1/4 Rack Width False Front
Face Plate
	IPL
	TS2
		R	COM
		1
Use 2 mounting holes on		2
			ACT
			®
			100
opposite corners.			LINK
			(2) 4-40 x 3/16" Screws

Figure 2-1 — Rack mounting the interface on the rack shelf

NOnly products that are 3.5 inches deep can be mounted to a 1U 3.5-inch Deep Rack Shelf. Any 1U or 1-inch high rack-mountable Extron product can be mounted on the Universal 1U Rack Shelf (shown in the following diagram).

IPL T S Series • Installation and Operation 2-3