IPL
Command | ASCII (Telnet) | URL Encoded (Web) | Response | Additional description |
| (host to unit) | (host to unit) | (unit to host) |
|
Firmware version, part number and information requests
NIn a query response, an asterisk (*) after the version number indicates the version that is currently used.
A question mark (? or ?.??) indicates that the factory default firmware is the only firmware loaded in the IPL T S unit.
A carat (^) indicates the version of firmware that should be running, but, since a mode 1 reset was performed, the factory default firmware version is loaded and running instead. An exclamation point (!) indicates that the firmware is corrupted.
NResponses to commands differ depending on which, if any, verbose response mode the IPL T S device is in. See the CV command (E X2@ CV}) under IP setup commands later in this table.
Query firmware | Q or 1Q | Q or 1Q | X1! ] |
| Show the IPL T S unit’s firmware version |
version |
|
| or Ver01*X1! ] |
| (X1!) to two decimal places. This query |
Example: | 1Q | 1Q | 1.01 |
| yields the number of the currently running |
|
|
| or Ver01*1.01 |
| version of the |
Query verbose | 0Q | 0Q | Sum of responses from | Show the bootstrap, | |
firmware version |
|
| 4Q] |
| updated firmware versions. |
information |
|
| or Ver00*sum of responss from | See 2Q, 3Q, and 4Q below. | |
|
|
|
|
| |
Example: | 0Q | 0Q | |||
|
|
| Series |
T S Series •
Query bootstrap | 2Q | 2Q |
firmware version |
|
|
Example: | 2Q | 2Q |
Query factory | 3Q | 3Q |
firmware version |
|
|
X1! ]
or Ver02*X1! ]
1.03 ]
X1! (plus Web
or Ver03*X1! (plus Web ver.-
The bootstrap firmware is not user- replaceable, but you may need this information during troubleshooting.
Example: | 3Q | 3Q |
|
Query updated | 4Q | 4Q |
firmware version |
|
|
X1! (plus Web
or Ver04*X1! (plus Web ver.-
In this example the factory firmware version is 1.00 and the IP Link kernel version is 1.18 for the IPL T S unit, dated 20 January 2005.
Use this command to find out which version of the firmware, if any, was uploaded into the controller after it left the factory.
Communication and Control
Example: | 4Q | 4Q |
| In this example the current firmware version |
| is 1.01, the IP Link kernel version is 1.31, for |
| the IPL T S device, dated 28 February, 2005. |