Patton electronic M-ATA manual Settings

SmartLink M-ATA Getting Started Guide 4 • Network—LAN

IP address

The IP address of the SmartLink on the WAN interface.

MAC address

The MAC address of the WAN Ethernet interface in the SmartLink.

Subnet Mask

The subnet mask is 32-bit number that filters a destination IP address to determine to which subnet it belongs. For example, a subnet mask of 255.255.0.0 for a network ID of 192.5.0.0 tells the switch to accept traffic des- tined for IP addresses that begin with 192.5—all other packets are ignored.

Default Gateway

The IP address of the gateway. The gateway IP address can be retrieved automatically in DHCP mode or be set up manually with a fixed IP address.

Domain name

The network domain name of the SmartLink.

DNS address

Refers to the address of your domain name server that was defined under LAN settings or that was learned dynamically through DHCP.

DynDNS address

The IP address of the dynamic DNS server that will be notified when the SmartLink M-ATA’s dynamic IP address changes.

VLAN

VLAN tag value encoded in the LAN Ethernet header in all outgoing packets

Priority Tag

Priority tag value encoded in the LAN Ethernet header in outgoing packets.

Settings

The Settings window contains the following sections:

•Internet Configuration (see figure 5 on page 28)

•WAN PPPoE Configuration (see figure 6 on page 29)

•MAC Spoofing Configuration (see figure 8 on page 30)

•Internet VLAN Configuration (see figure 8 on page 30)

Note After configuring the sections, click the Save Internet Settings button (see figure 4 on page 26) to save the new configuration.

Settings 27