Patton electronic M-ATA manual Supplementary Service Activation

Page 43

SmartLink M-ATA Getting Started Guide	5 • Telephony

Phone Number

Enter the telephone number or the user part of the SIP registration.

User Name

Enter the user name that will be used for validation of the VoIP SIP registration or call invitation.

Port

Specify the signaling port.

CallerID Name

Enter the caller ID name.

Password

Enter the password.

Supplementary Service Activation

These settings enable or disable each of following calling features. Most features can also be enabled or disabled by using the telephone handset (see section “Supplementary Service Keys” on page 58 for details).

Figure 21. Supplementary Service Settings section of Phone 1 window

Call Forward All

Enable call forward all service—All received calls will be forwarded to the destination speciﬁed under the call forwarding settings.

Selective Call Forward

Enable call forward no answer service—All received calls that are not answered will be forwarded to the desti- nation speciﬁed under the call forwarding settings.

Three-Way Conferencing

Enable three way conference service—This service enables you to add a third party to an existing two-way con- versation, and hold a three-party conference call.

Incoming Call Block

Enable incoming call block service—Allows for selected inbound caller IDs to be blocked.

Phone 1

43

Image 43

Contents SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables Audience About this guideStructure Safety when working with electricity PrecautionsGeneral observations Typographical conventions used in this documentGeneral conventions General information Chapter contentsSmartLink M-ATA SmartLink M-ATA overviewSmartLink installation Phone Power adapter Installing the M-ATAResetting the M-ATA to factory default System information System Uptime HomeSystem information System Status Network-LAN Status Network SettingsInterface Status Settings Obtain LAN conﬁguration dynamically Internet ConﬁgurationSpecify ﬁxed LAN conﬁguration WAN PPPoE Conﬁguration Enable PPPoEAuthentication SettingsVlan Conﬁguration Conﬁguring Dynamic DNSMAC Spooﬁng Conﬁguration WAN MAC Address SpoofedSaving your work ToS/DiffServVlan Tag Ieee 802.1q Priority Tag Ieee 802.1qTelephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Messages waiting Caller ID SettingUser Name Subscribed for VoicemailGateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration RTP Parameters SIP Timer Values millisecondsSIP Parameters Hook Flash Mime TypeNAT Traversal FAX without T.38 Use G.711 fax Audio/CODEC ConﬁgurationPacketization Jitter BufferUser Information PhoneSupplementary Service Activation Dialing by IP Address Message Waiting IndicatorDistinctive Ring Call TransferDial Out Type Call Forward SettingsIncoming Call Block Selective Call Forward SettingsOutgoing Call Block Speed Dial Serv Http Digest SettingLine 1 Speed Dial Settings Speed DialSystem System System Conﬁrm new password Set Security PasswordNew Root Password New User PasswordSyslog Server Syslog ServiceEnable Syslog ConﬁgurationDebug Server Debug ServiceEnable Debug NTP ServiceEnable Ping Reply Service AccessTime Zone Adjust clock for daylight savings Enable HttpCall Progress Tones LocalizationHolding Tone Dial TonePrompt Tone Conﬁrm ToneFollowing is a sample ring cadence pattern conﬁguration Distinctive Ring SettingsWarm Line Supplementary Service KeysCall forward selective Block Anonymous CallsCalling Preﬁx Keys IP DialingSpeed Dialing Income Caller IDCall Conference Drop Call HoldCall Waiting call alternative Call ConferenceControl Timer Values FXS Port FXS Port Polarity Conﬁguration Ring SettingSnmp System Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp Community ConﬁgurationAuto Upgrade Manual Upgrade window Manual UpgradeReload Documentation Documentation link IntroductionLogout Logout window Contacting Patton for assistance Patton support headquarters in the USA Contact informationRMA numbers Warranty coverageAppendix a Compliance information CE Notice Declarations of Conformity Safety ComplianceCompliance Radio and TV Interference FCC PartAppendix B Speciﬁcations Fax and Modem Support Voice Processing signalling dependentVoice Connectivity ConnectivityOperating Environment Voice Services/FeaturesIP Services ManagementAppendix C Dial plans Complex Dial Plan Sample Dial PlansSimple Dial Plan Non-dialed Line Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt conﬁguration Existing voice prompt conﬁguration Accessing the voice prompt