Patton electronic M-ATA manual Auto Upgrade

Page 65

SmartLink M-ATA Getting Started Guide

6 • System

 

 

Auto Upgrade

The SmartLink M-ATA family includes a configuration and firmware download manager server that allows for the updating of large numbers of SmartLink M-ATAs from a central location. By factory default, all SmartLink M-ATA units are set with auto-update on and to access the Patton auto-update server. Many of Patton’s car- rier customers have chosen to setup their own auto-update server to provide service specific information for their end users. Patton recommends that end users do not change the auto-update server or set “Enable auto- upgrade” to “NO” without consulting with their service provider.

Figure 41. AutoUpgrade window

Routine Upgrade every xxx day(s)

If selected, the SmartLink M-ATA will check for automatically check for updates at system reload time and on a periodic basis based on the number of days selected.

Enable Auto Upgrade

Enable or disable auto upgrade—If enabled, the SmartLink M-ATA will automatically check the upgrade server for new system firmware and software upon reload, power cycle, or when the routine upgrade interval expires.

Auto Upgrade Protocol

Select the protocol for auto upgrade

Upgrade Server

Specify the auto upgrade server IP address

Auto Upgrade URL

Specify the auto upgrade server by URL. This field is dependent on the auto upgrade service package installa- tion. The default value is iadmgr.

Saving your work

When you are finished configuring settings, click the Save AutoUpgrade button to save the changes.

Auto Upgrade

65

Image 65
Contents SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables Structure About this guideAudience Safety when working with electricity PrecautionsGeneral conventions Typographical conventions used in this documentGeneral observations General information Chapter contentsSmartLink M-ATA SmartLink M-ATA overviewSmartLink installation Phone Power adapter Installing the M-ATAResetting the M-ATA to factory default System information System Uptime HomeSystem information System Status Network-LAN Interface Status Network SettingsStatus Settings Specify fixed LAN configuration Internet ConfigurationObtain LAN configuration dynamically Authentication Enable PPPoESettings WAN PPPoE ConfigurationMAC Spoofing Configuration Configuring Dynamic DNSWAN MAC Address Spoofed Vlan ConfigurationVlan Tag Ieee 802.1q ToS/DiffServPriority Tag Ieee 802.1q Saving your workTelephony Telephony Telephony Phone Line Status VoIP StatusVoIP Server Registration Status User Name Caller ID SettingSubscribed for Voicemail Messages waitingSIP Configuration SIP Server SettingsGateway Settings VoIP Vlan Configuration SIP ExtensionsRTP Telephone Event Configuration SIP Parameters SIP Timer Values millisecondsHook Flash Mime Type RTP ParametersNAT Traversal Packetization Audio/CODEC ConfigurationJitter Buffer FAX without T.38 Use G.711 faxUser Information PhoneSupplementary Service Activation Distinctive Ring Message Waiting IndicatorCall Transfer Dialing by IP AddressDial Out Type Call Forward SettingsOutgoing Call Block Selective Call Forward SettingsIncoming Call Block Line 1 Speed Dial Settings Http Digest SettingSpeed Dial Speed Dial ServSystem System System New Root Password Set Security PasswordNew User Password Confirm new passwordEnable Syslog Syslog ServiceConfiguration Syslog ServerEnable Debug Debug ServiceNTP Service Debug ServerTime Zone Adjust clock for daylight savings Service AccessEnable Http Enable Ping ReplyCall Progress Tones LocalizationPrompt Tone Dial ToneConfirm Tone Holding ToneFollowing is a sample ring cadence pattern configuration Distinctive Ring SettingsCall forward selective Supplementary Service KeysBlock Anonymous Calls Warm LineSpeed Dialing IP DialingIncome Caller ID Calling Prefix KeysCall Waiting call alternative Call HoldCall Conference Call Conference DropControl Timer Values FXS Port FXS Port Polarity Configuration Ring SettingSnmp Trap Configuration Snmp ConfigurationSnmp Community Configuration Snmp System ConfigurationAuto Upgrade Manual Upgrade window Manual UpgradeReload Documentation Documentation link IntroductionLogout Logout window Contacting Patton for assistance Patton support headquarters in the USA Contact informationRMA numbers Warranty coverageAppendix a Compliance information Compliance Safety ComplianceRadio and TV Interference FCC Part CE Notice Declarations of ConformityAppendix B Specifications Voice Connectivity Voice Processing signalling dependentConnectivity Fax and Modem SupportIP Services Voice Services/FeaturesManagement Operating EnvironmentAppendix C Dial plans Simple Dial Plan Sample Dial PlansNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt configuration Existing voice prompt configuration Accessing the voice prompt