Patton electronic M-ATA manual Call Hold, Call Waiting call alternative, Call Conference

Page 60

SmartLink M-ATA Getting Started Guide	6 • System

Speed Dial

Conﬁgures speed dialing keys. To conﬁgure speed dialing numbers enter the calling preﬁx key (*71 is the fac- tory default), the speed dial key, the number to dial and then on hook the phone. You will hear a second dial tone after entering the calling preﬁx key. Speed dial calling must be enabled using the activate sequence deﬁned in the supplementary service table.

Example:

*7123019751000 and on-hook the phone. When 2 is pressed on the telephone key pad, 3019751000 will be called.

Call Forward All

Conﬁgures the number to unconditionally forward all calls to. To conﬁgure call forward all enter the calling preﬁx key (*73 is the factory default), the number to dial and then on hook the phone. You will hear a second dial tone after entering the calling preﬁx key. Before using, Call Forward All must be enabled using the activate sequence deﬁned in the supplementary service table.

Example:

*733019751000 and on-hook the phone. All calls received will forward to 3019751000.

IP Dialing

Allows direct calling using an IP address. To use calling by IP address enter the calling preﬁx key (*72 is the fac- tory default), the * key, the IP address using the * key to between octets of the IP address, the * key and the port number. You will hear a second dial tone after entering the calling preﬁx key. Before using direct IP address dialing must be enabled using the activate sequence deﬁned in the supplementary service table.

Example:

To place a call to IP address 192.168.1.20:5061 enter *73*192*168*1*20*5060.

Call Hold

Conﬁgures the key sequence to place a call on call on hold – The factory default is ﬂash hook 1.

Call Waiting (call alternative)

Conﬁgures the key sequence to switch between calls. The factory default is ﬂash hook *.

Call Conference

Conﬁgures the key sequence to conference two calls together. The factory default is ﬂash hook 7.

Call Conference Drop

Conﬁgures the key sequence to drop the last call that was added to the conference the conference. The factory default is ﬂash hook 8.

Call Transfer

Conﬁgures the key sequence for call transfer. The factory default is ﬂash hook 4.

Localization

60

Image 60

Contents SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables About this guide AudienceStructure Precautions Safety when working with electricityTypographical conventions used in this document General observationsGeneral conventions Chapter contents General informationSmartLink M-ATA overview SmartLink M-ATASmartLink installation Installing the M-ATA Phone Power adapterResetting the M-ATA to factory default Home System information System UptimeSystem information System Status Network-LAN Network Settings StatusInterface Status Settings Internet Conﬁguration Obtain LAN conﬁguration dynamicallySpecify ﬁxed LAN conﬁguration Enable PPPoE AuthenticationSettings WAN PPPoE ConﬁgurationConﬁguring Dynamic DNS MAC Spooﬁng ConﬁgurationWAN MAC Address Spoofed Vlan ConﬁgurationToS/DiffServ Vlan Tag Ieee 802.1qPriority Tag Ieee 802.1q Saving your workTelephony Telephony Telephony VoIP Status VoIP Server Registration StatusPhone Line Status Caller ID Setting User NameSubscribed for Voicemail Messages waitingSIP Server Settings Gateway SettingsSIP Conﬁguration SIP Extensions RTP Telephone Event ConﬁgurationVoIP Vlan Conﬁguration SIP Timer Values milliseconds SIP ParametersHook Flash Mime Type RTP ParametersNAT Traversal Audio/CODEC Conﬁguration PacketizationJitter Buffer FAX without T.38 Use G.711 faxPhone User InformationSupplementary Service Activation Message Waiting Indicator Distinctive RingCall Transfer Dialing by IP AddressCall Forward Settings Dial Out TypeSelective Call Forward Settings Incoming Call BlockOutgoing Call Block Http Digest Setting Line 1 Speed Dial SettingsSpeed Dial Speed Dial ServSystem System System Set Security Password New Root PasswordNew User Password Conﬁrm new passwordSyslog Service Enable SyslogConﬁguration Syslog ServerDebug Service Enable DebugNTP Service Debug ServerService Access Time Zone Adjust clock for daylight savingsEnable Http Enable Ping ReplyLocalization Call Progress TonesDial Tone Prompt ToneConﬁrm Tone Holding ToneDistinctive Ring Settings Following is a sample ring cadence pattern conﬁgurationSupplementary Service Keys Call forward selectiveBlock Anonymous Calls Warm LineIP Dialing Speed DialingIncome Caller ID Calling Preﬁx KeysCall Hold Call Waiting call alternativeCall Conference Call Conference DropControl Timer Values FXS Port Ring Setting FXS Port Polarity ConﬁgurationSnmp Conﬁguration Snmp Trap ConﬁgurationSnmp Community Conﬁguration Snmp System ConﬁgurationAuto Upgrade Manual Upgrade Manual Upgrade windowReload Documentation Introduction Documentation linkLogout Logout window Contacting Patton for assistance Contact information Patton support headquarters in the USAWarranty coverage RMA numbersAppendix a Compliance information Safety Compliance ComplianceRadio and TV Interference FCC Part CE Notice Declarations of ConformityAppendix B Speciﬁcations Voice Processing signalling dependent Voice ConnectivityConnectivity Fax and Modem SupportVoice Services/Features IP ServicesManagement Operating EnvironmentAppendix C Dial plans Sample Dial Plans Simple Dial PlanNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt conﬁguration Accessing the voice prompt Existing voice prompt conﬁguration