Patton electronic M-ATA manual Internet Conﬁguration, Obtain LAN conﬁguration dynamically

Page 28

SmartLink M-ATA Getting Started Guide	4 • Network—LAN

Internet Conﬁguration

Figure 5. Internet Conﬁguration section of the Settings window

Obtain LAN conﬁguration dynamically

Select this option if appropriate. If you choose Obtain LAN conﬁguration dynamically, the information is detected automatically through DHCP.

Specify ﬁxed LAN conﬁguration

Select this option if you will not be using DHCP. If you choose Specify ﬁxed LAN conﬁguration, you will have to enter the following information:

•IP address.

•IP of the netmask.

•IP of the gateway.

•IP of the DNS Server, if applicable.

•Host name (the name will identify the computer on the Internet, such as SL4020.patton.com).

•Domain name (the name that will identify one or more IP addresses). For example, the patton.com domain is used by Patton Electronics Company. That domain can include multiple hostnames (such as SL4020.patton.com, ftp.patton.com, and so on) that point to individual computers on the Patton network. In short, for the hostname URL http://www.patton.com, the domain name is patton.com.

Settings

28

Image 28

Contents SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricityGeneral observations Typographical conventions used in this documentGeneral conventions Chapter contents General informationSmartLink M-ATA overview SmartLink M-ATASmartLink installation Installing the M-ATA Phone Power adapterResetting the M-ATA to factory default Home System information System UptimeSystem information System Status Network-LAN Status Network SettingsInterface Status Settings Obtain LAN conﬁguration dynamically Internet ConﬁgurationSpecify ﬁxed LAN conﬁguration Enable PPPoE AuthenticationSettings WAN PPPoE ConﬁgurationConﬁguring Dynamic DNS MAC Spooﬁng ConﬁgurationWAN MAC Address Spoofed Vlan ConﬁgurationToS/DiffServ Vlan Tag Ieee 802.1qPriority Tag Ieee 802.1q Saving your workTelephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Caller ID Setting User NameSubscribed for Voicemail Messages waitingGateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration SIP Timer Values milliseconds SIP ParametersHook Flash Mime Type RTP ParametersNAT Traversal Audio/CODEC Conﬁguration PacketizationJitter Buffer FAX without T.38 Use G.711 faxPhone User InformationSupplementary Service Activation Message Waiting Indicator Distinctive RingCall Transfer Dialing by IP AddressCall Forward Settings Dial Out TypeIncoming Call Block Selective Call Forward SettingsOutgoing Call Block Http Digest Setting Line 1 Speed Dial SettingsSpeed Dial Speed Dial ServSystem System System Set Security Password New Root PasswordNew User Password Conﬁrm new passwordSyslog Service Enable SyslogConﬁguration Syslog ServerDebug Service Enable DebugNTP Service Debug ServerService Access Time Zone Adjust clock for daylight savingsEnable Http Enable Ping ReplyLocalization Call Progress TonesDial Tone Prompt ToneConﬁrm Tone Holding ToneDistinctive Ring Settings Following is a sample ring cadence pattern conﬁgurationSupplementary Service Keys Call forward selectiveBlock Anonymous Calls Warm LineIP Dialing Speed DialingIncome Caller ID Calling Preﬁx KeysCall Hold Call Waiting call alternativeCall Conference Call Conference DropControl Timer Values FXS Port Ring Setting FXS Port Polarity ConﬁgurationSnmp Conﬁguration Snmp Trap ConﬁgurationSnmp Community Conﬁguration Snmp System ConﬁgurationAuto Upgrade Manual Upgrade Manual Upgrade windowReload Documentation Introduction Documentation linkLogout Logout window Contacting Patton for assistance Contact information Patton support headquarters in the USAWarranty coverage RMA numbersAppendix a Compliance information Safety Compliance ComplianceRadio and TV Interference FCC Part CE Notice Declarations of ConformityAppendix B Speciﬁcations Voice Processing signalling dependent Voice ConnectivityConnectivity Fax and Modem SupportVoice Services/Features IP ServicesManagement Operating EnvironmentAppendix C Dial plans Sample Dial Plans Simple Dial PlanNon-dialed Line Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt conﬁguration Accessing the voice prompt Existing voice prompt conﬁguration