Patton electronic M-ATA Supplementary Service Keys, Call forward selective, Block Anonymous Calls

Page 58

SmartLink M-ATA Getting Started Guide

6 • System

 

 

Supplementary Service Keys

Supplementary Service Keys are key sequences that can enable and disable certain calling features from an analog phone handset attached to the SmartLink M-ATA.

Note The supplementary service keys must begin with a ‘*’,’#’ character, or f (flash hook) and follow a 1 or 2 numeric digit(s).

Figure 34. Supplementary Service Keys section of Localization Window

Call forward All

Enables or disables the unconditional call forwarding feature.

Call forward on Busy

Enables or disables the call forwarding on busy feature.

Call forward selective

Enables or disables the call forwarding on busy feature.

Call Waiting

Enables or disables the call waiting feature.

Incoming Call Block

Enables or disables the blocking of incoming calls based on the phone number of the caller feature.

Block Anonymous Calls

Enables or disables the blocking of incoming calls that are using the anonymous caller ID feature.

Distinctive Ring

Enables or disables the distinctive ring tones based on the phone number of the calling party feature.

Warm Line

Enables or disables the warm line calling feature.

Localization

58

Image 58
Contents SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricityGeneral observations Typographical conventions used in this documentGeneral conventions Chapter contents General informationSmartLink M-ATA overview SmartLink M-ATASmartLink installation Installing the M-ATA Phone Power adapterResetting the M-ATA to factory default Home System information System UptimeSystem information System Status Network-LAN Status Network SettingsInterface Status Settings Obtain LAN configuration dynamically Internet ConfigurationSpecify fixed LAN configuration Settings Enable PPPoEAuthentication WAN PPPoE ConfigurationWAN MAC Address Spoofed Configuring Dynamic DNSMAC Spoofing Configuration Vlan ConfigurationPriority Tag Ieee 802.1q ToS/DiffServVlan Tag Ieee 802.1q Saving your workTelephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Subscribed for Voicemail Caller ID SettingUser Name Messages waitingGateway Settings SIP Server SettingsSIP Configuration RTP Telephone Event Configuration SIP ExtensionsVoIP Vlan Configuration Hook Flash Mime Type SIP Timer Values millisecondsSIP Parameters RTP ParametersNAT Traversal Jitter Buffer Audio/CODEC ConfigurationPacketization FAX without T.38 Use G.711 faxPhone User InformationSupplementary Service Activation Call Transfer Message Waiting IndicatorDistinctive Ring Dialing by IP AddressCall Forward Settings Dial Out TypeIncoming Call Block Selective Call Forward SettingsOutgoing Call Block Speed Dial Http Digest SettingLine 1 Speed Dial Settings Speed Dial ServSystem System System New User Password Set Security PasswordNew Root Password Confirm new passwordConfiguration Syslog ServiceEnable Syslog Syslog ServerNTP Service Debug ServiceEnable Debug Debug ServerEnable Http Service AccessTime Zone Adjust clock for daylight savings Enable Ping ReplyLocalization Call Progress TonesConfirm Tone Dial TonePrompt Tone Holding ToneDistinctive Ring Settings Following is a sample ring cadence pattern configurationBlock Anonymous Calls Supplementary Service KeysCall forward selective Warm LineIncome Caller ID IP DialingSpeed Dialing Calling Prefix KeysCall Conference Call HoldCall Waiting call alternative Call Conference DropControl Timer Values FXS Port Ring Setting FXS Port Polarity ConfigurationSnmp Community Configuration Snmp ConfigurationSnmp Trap Configuration Snmp System ConfigurationAuto Upgrade Manual Upgrade Manual Upgrade windowReload Documentation Introduction Documentation linkLogout Logout window Contacting Patton for assistance Contact information Patton support headquarters in the USAWarranty coverage RMA numbersAppendix a Compliance information Radio and TV Interference FCC Part Safety ComplianceCompliance CE Notice Declarations of ConformityAppendix B Specifications Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem SupportManagement Voice Services/FeaturesIP Services Operating EnvironmentAppendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial PlanSample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt configuration Accessing the voice prompt Existing voice prompt configuration