
Operating
Selecting an input signal (continued)
1. Press the VIDEO button on the remote control to select an input for video signal.
Each time you press the button, the projector switches its video input port as below.
COMPONENT (Y, CB/PB, CR/PR) S-VIDEO VIDEO
LASER
INDICATOR
STANDBY/ON VIDEO | RGB |
MY SOURCE/
DOC.CAMERA
●While TURN ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is detected (44). If VIDEO button is pushed when RGB 1 or RGB 2 port is selected, the projector will check COMPONENT port first.
1. Press the MY SOURCE / DOC. CAMERA button on the remote control. The input signal will be changed into the signal you set as MY SOURCE(46).
LASER
INDICATOR
STANDBY/ON VIDEO | RGB |
MY SOURCE/
DOC.CAMERA
●This function also can use for document camera. Select the input port that connected the document camera.
Searching an input signal
1. Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to find any input signals.
When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.
LASER
INDICATOR
STANDBY/ON VIDEO | RGB |
MY SOURCE/
DOC.CAMERA
SEARCH
RGB 1 RGB 2 HDMI COMPONENT (Y, CB/PB, CR/PR)
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect ratio in turn.
For an RGB signal
NORMAL 4:3 16:9 16:10 REAL
For an HDMI signal
NORMAL 4:3 16:9 16:10 14:9 REAL
ASPECT
For a video signal,
4:3 16:9 16:10 14:9 REAL
For no signal
4:3 (fixed)
● The NORMAL mode keeps the original aspect ratio of the signal.
18