Dukane 9136 user manual Setup menu, Monitor OUT

SETUP menu

SETUP menu (continued)

Item

Description

	Using the ▲/▼ buttons corrects the horizontal keystone distortion.
	Shrink the right of the image ó Shrink the left of the image
	• The adjustable range of this function will vary among inputs. For
	some input, this function may not work well.
KEYSTONE	• When the zoom adjustment is set to the TELE (telephoto focus), this
	function may be excessive. This function should be used when the zoom
	adjustment is set to the full WIDE (wide-angle focus) whenever possible.
	• When the vertical lens shift is not set fully upward (not set fully
	downward for the optional lens type FL-601 only (47)), this
	function may not work well.
	• This function will be unavailable when the Transition Detector is on (53).
	Using the ▲/▼ buttons turns off/on the whisper mode.
WHISPER	NORMAL ó WHISPER
	• When the WHISPER is selected, acoustic noise and screen
	brightness are reduced.
	Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR	NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
	If the Transition Detector is TURN ON and MIRROR status is
	changed, Transition Detector Alarm (53) will be displayed when
	projector is restarted after the power switch is turned off.
	The combination of a picture shown on screen and output from the
	RGB OUT port can be arranged in the menu.
	The picture coming into the port selected in the (2) is output to the RGB
	OUT port while an image from the port chosen in the (1) is on screen.
	(1) Choose a picture input port using ▲/▼ buttons.
	QUIT ó RGB1 ó RGB2 ó HDMI
	STANDBY ó VIDEO ó S-VIDEO ó COMPONENT(Y, CB/PB, CR/PR)
	• Choose STANDBY, to select the output signal from the RGB OUT
	port in the standby mode.
MONITOR OUT	• While QUIT is selected, pressing the ◄ button returns to the
	previous menu.
	(2) Select one of the RGB ports using ◄/► buttons.
	Choosing the RGB1 allows the following choice.
	RGB1 ó OFF
	Choosing the RGB2 allows the following choice.
	RGB2 ó OFF
	Choosing other input or STANDBY allows
	the following choice.
	RGB1 ó RGB2 ó OFF
	• OFF disables the RGB OUT port.

37