Using the magnify feature
1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go into the MAGNIFY mode. In the Magnify mode, the picture will be zoomed. The indication will disappear in several seconds with no operation.
Operating
ESC MENU RESET
POSITION AUTO
MAGNIFY | MY BUTTON VOLUME |
ON 1 +
OFF 2 -
FREEZE KEYSTONE MUTE
2. Use the ▲/▼ cursor buttons to adjust the zoom level.To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom area, press the POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
●The projector automatically exits from the MAGNIFY mode when the input signal is changed or when the display condition is changed.
●In the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be finely adjusted. Closely watch the screen to find the level you want.
Freezing the screen
1. Press the FREEZE
button on the remote control.
The “FREEZE” indication will appear on the screen (however, the indication will not appear when the TURN OFF is selected for the MESSAGE item in the SCREEN menu (42)), and the projector will go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press the FREEZE
button again.
MAGNIFY | MY BUTTON VOLUME |
ON 1 +
OFF 2 -
FREEZE KEYSTONE MUTE
●The projector automatically exits from the FREEZE mode when some control buttons are pressed.
●If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long.
21