Dukane 9136 Maintenance, Type number = 456-8949H Replacing the lamp, Lamp cover Handles

Page 63

Slide the lamp cover back in place and firmly fasten the screw of the lamp cover.

Loosen the 3 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles.

Maintenance

Maintenance

Lamp

A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = 456-8949H

Replacing the lamp

1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.

2. Prepare a new lamp.

If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.

In case of replacement by yourself,

3. Loosen the screw (marked by arrow) of the lamp cover and then slide the lamp cover to the side to remove it.

4.

5. Insert the new lamp, and retighten firmly the 3 screws of the lamp that are loosened in the previous process to lock it in place.

6.

7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu (45).

(1)Press the MENU button to display a menu.

(2)Point at the “Go to Advanced Menu …” in the menu using the ▼/▲ button, then press the ► button.

(3)Point at the “OPTION” in the left column of the menu using the ▼/▲button, then press the ► button.

The lamp cover

The handles

(4)Point at the “LAMP TIME” using the ▼/▲ button, then press the ► button. A dialog will appear.

(5)Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time.

NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

63

Image 63

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Fastening the lens cover Contents of package10 9 Part namesProjector HOTRear panel Control panelEnter button to push down the center point Remote controlBack Remote control Laser pointer &13 It is a beam outletSetting up Arrangement On a horizontal surfaceSuspended from the ceiling To loose an elevator foot Pull up the elevator knob Adjusting the projectors elevatorUsing the security bar and slot Security bar Anti-theft chain or wire Security slotVCR/DVD player Connecting your devicesMonitor Wiht anAbout Plug-and-Play capability Connecting your devicesConnector of the power cord to the outlet Connecting power supplyHitachi MAXELL, Part No.LR6 Remote controlInstalling the batteries Laser pointerBack sensor About the remote control signalChanging the frequency of remote control signal Front and top sensorsUsing as a simple PC mouse & keyboard Using as a wired remote controlSTANDBY/ON button Power indicator Power switch Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSearching an input signal Selecting an input signalSelecting an aspect ratio  For a video signal and s-video signal Adjusting the zoom and focusAdjusting the lens shift Using the automatic adjustment featureCorrecting the keystone distortions Adjusting the positionFreezing the screen Using the magnify featureTemporarily blanking the screen Using the menu function Easy MenuEnter button Advanced Menu Using the menu functionKeystone Picture ModeAspect AutoEasy Menu Gamma Picture menuColor Temp Picture menuSAVE-1, SAVE-2, SAVE-3, SAVE-4 Active IrisLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemoryImage menu Over ScanPosition Size PhaseAuto Adjust Image menu3D-YCS Input menuProgressive Video NRHdmi Input menuComponent Video FormatRGB Resolution Setup menu Monitor OUT Setup menuAudio menu Using the /// buttons adjusts the menu position Screen menuBlank Start UP Screen menuCapturing error has occurred. Please try again MyScreenMyScreen registration is finished Message To the Template function is pressed  Using / buttons switches the mode forTemplate screen. The selected template pattern TemplateOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Fanspeed ServiceMY Button MY SourceGhost Filter MessageLens Type Remote Freq Factory ResetKEY Lock Remote ReceivSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionIf you have forgotten your Password Turning on the MyScreen Password FunctionRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Description SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Using the MY Text Password function Setting the Transition Detector offWriting the MY Text Displaying the MY Text Turning on the MY Text PasswordPassword and the screen will return to Network menu SetupNetwork menu Name Projector Use the / buttons To switch the image displayed Press the or ESC button on the remote control MY ImageInformation Channel Closed Caption menuDisplay ModeType number = 456-8949H Replacing the lamp MaintenanceCase of replacement by yourself LampLamp Lamp warningType number = MU05661 Air filterInternal clock battery For a holderFor B holder Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsSignal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedPhenomena that may be easily mistaken for machine defects Whisper function is working Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedAir filter MU05661 Warranty and after-serviceSpecifications Specifications139 319 418 154 Unit mm Specifications