Christie Digital Systems DHD800 user manual Indicators

Part Names and Functions

Indicators

POWER indicator

This indicator lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (pp.57, 79-81)

LAMP Indicator

This indicator is dim when the projector is turned on. And bright when the projector is in stand-by mode. (pp.79-81)

WARNING TEMP. indicator

This indicator flashes red when internal projector temperature is too high. (pp.72, 79-81)

WARNING FILTER indicator

This indicator does not work in the default state. When a filter cartridge (supplied) has been installed in the projector, it works as follows: –Blink slow when the filter is being scrolled.

(pp.64, 79)

–Blink fast when the filter scroll is not working properly. (pp.64, 81)

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement. (pp.62, 64, 81)

SHUTTER indicator

Light blue when the shutter is closed. (p79)

LAMP 1 REPLACE indicator

Turn orange when the life of the projection lamp1 draws to an end. (pp.68, 80)

LAMP 2 REPLACE indicator

Turn orange when the life of the projection lamp2 draws to an end. (pp.68, 80)

DHD800 User Manual	13
020-000244-01 Rev.1 (08-2010)