Christie Digital Systems DHD800 user manual Manual PC Adjustment

Page 39

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those manually adjusted parameters. It allows you to recall the setting for a specific computer.

Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC System Menu.

PC ADJUST MENU

1Press the MENU button to display the On-Screen Menu. Use the Point  buttons to move the red frame pointer

to the PC Adjust Menu icon.

PC Adjust Menu icon

2Use the Point 54 buttons to move the red frame pointer to the desired item and then press the SELECT button

to display the adjustment dialog box. Use the Point  buttons to adjust the setting value.

Fine sync

Use the Point buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Move the red frame pointer to the desired item and press the SELECT button.

Status (Stored/Free) of the

Selected Mode.

Total dots

Use the Point  buttons to adjust the number of total dots in one horizontal period to match your PC image.

Position H

Use the Point  buttons to adjust the horizontal picture position.

Selected Mode

Press the Point  buttons to adjust the value.

Position V

Use the Point  buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Press the SELECT button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.”

Clamp

Use the Point  buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

Display area H

Use the Point  buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point  buttons to adjust the vertical area displayed by this projector.

Current mode

Press the SELECT button at Current mode icon to show the information of the connected computer.

Press the SELECT button at this icon to display the previous items.

DHD800 User Manual

37

020-000244-01 Rev.1 (08-2010)

 

Image 39
Contents DHD800 Page User’s Manual Features and Design Table of Contents For EU Users To The OwnerSafety Instructions Air Circulation Positioning Precautions Installing the Projector in Proper DirectionsMoving the Projector AC Power Cord for the United States and Canada ComplianceCanadian Radio Interference Regulations Part Names and Functions FrontBack LAN port Terminals and ConnectorsUSB Connector Series B D-sub 15-PIN Input TerminalSide Control Side Control and IndicatorsIndicators Remote Control Remote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Code Remote Control Code Pressing Image ADJ ButtonNumber of Times Positioning Projector InstallationLens Installation Picture Level and Pitch AdjustmentWhen the lens is shifted to rightmost Lens Shift AdjustmentWhen the lens is shifted to top When the lens is shifted to bottomTerminals of Projector Replacement of TerminalConnecting to Computer Cables used for connectionTerminals of the projector Connecting to Video Equipment Monitor Out Signal TableProjector To loosen the cable tie Attaching the Cable TieConnecting the AC Power Cord For the U.S.A. and CanadaFor Continental Europe Enter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Menu Bar Operating with Projector Control Information Menu InformationOperating with Remote Control Image ADJ. button Timer buttonShutter button Filter buttonSide Control Operation Remote Control OperationInput Selection InputInput Menu When Selecting the Input 1 with DVI/D-sub 15 terminalsComputer Input Source Selection Menu OperationVideo Input Source Selection RGB AV HdcpPb/Cb, Pr/Cr Selecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemDirect Operation Auto PC AdjustmentTo store the adjusted parameters PC Adjust MenuManual PC Adjustment To store the adjusted data ResetMode free To clear the adjusted dataImage Image Level SelectionStandard Real Dynamic Image1 Image SEL. button StandardScreen Menu Screen Size AdjustmentDigital zoom + KeystoneCeiling RearPb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-Video JackStandard Cinema Dynamic Image1 Image SEL. button Natural Wide Keystone Picture Image Image AdjustmentImage Adjust Menu Pointer ModeColor Palette Color MMenu List Color M MenuGamma White balance Red/Green/BlueOffset Red/Green/Blue SharpnessSetting SettingLamp life control Lamp modeBackground Lamp controlPicture in Picture Color matching Edge blendingAdvanced color matching DynamicBlackCapture Hdmi setupLogo Logo selectChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Filter control Remote controlTo change the code for the remote control To reset the code for the remote controlOn start Power managementSecurity Key lock PIN code lockSecurity Change the PIN Code Change the PIN Code Lock settingRelease key ShutterProtection EffectVideo delay control Closed captionFrame lock Filter counter Filter replacement iconTest pattern Factory defaultFilter Instructions Maintenance and CareService Parts No 350 Reset the filter counter and the scroll counter p.66Scroll counter Resetting the Filter CounterResetting the Scroll Counter Filter counterLamp Status Display Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp ManagementLamp Replacement IndicatorsLamp 1 / 2 Replace indicators Lamp Handling Precautions Optional Color Wheel Installation Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingAppendix Power is turned off Network Information Image AdjustMenu Tree Computer Input/Video InputScreen PC AdjustSystem Image SelectSetting Projector is operating normally Indicators and Projector ConditionLamp Replace 1 Projector is detecting abnormal conditionFilter replacement icon Display Compatible Computer SpecificationsON-SCREEN Resolution Freq.kHz Freq.Hz30.000 List of Picture in Picture Supported Signal Format for Optional BoardTechnical Specifications Optional Parts Configurations of Terminals InputOutput PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Unit inch mm DimensionsEdge blending How to adjust multiple screensColor matching Page Page Corporate offices