Christie Digital Systems DHD800 Computer Input Source Selection, Menu Operation, Input Menu

Page 35

Input Selection

Computer Input Source Selection

Menu Operation

When Selecting the INPUT 1 with DVI/D-sub 15 terminals

1

Press the MENU button to display the On-Screen Menu.

Use the Point  buttons to move the red frame pointer

to the INPUT Menu icon.

2Use the Point 54 buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input.

3Press the select button again. The Source Select Menu appears.

4Use the Point 54 buttons to select the desired source and then press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to the desired source and press the SELECT button.

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

When Selecting the INPUT 2 with 5-BNC/Video/S-video terminals

INPUT MENU

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

Input Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Input 2

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

Note:

•When a slot is empty, the input is displayed in grayout.

DHD800 User Manual

33

020-000244-01 Rev.1 (08-2010)

 

Image 35
Contents DHD800 Page User’s Manual Features and Design Table of Contents For EU Users To The OwnerSafety Instructions Air Circulation Positioning Precautions Installing the Projector in Proper DirectionsMoving the Projector Canadian Radio Interference Regulations AC Power Cord for the United States and CanadaCompliance Back Part Names and FunctionsFront LAN port Terminals and ConnectorsUSB Connector Series B D-sub 15-PIN Input TerminalSide Control Side Control and IndicatorsIndicators Remote Control Wired Remote Control Remote Control Battery InstallationRemote Control Receivers and Operating Range Number of Times Remote Control CodeRemote Control Code Pressing Image ADJ Button Positioning Projector InstallationLens Installation Picture Level and Pitch AdjustmentWhen the lens is shifted to rightmost Lens Shift AdjustmentWhen the lens is shifted to top When the lens is shifted to bottomTerminals of Projector Replacement of TerminalTerminals of the projector Connecting to ComputerCables used for connection Projector Connecting to Video EquipmentMonitor Out Signal Table To loosen the cable tie Attaching the Cable TieFor Continental Europe Connecting the AC Power CordFor the U.S.A. and Canada Enter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Operating with Projector Control Information Menu InformationOperating with Remote Control Image ADJ. button Timer buttonShutter button Filter buttonSide Control Operation Remote Control OperationInput Selection InputInput Menu When Selecting the Input 1 with DVI/D-sub 15 terminalsComputer Input Source Selection Menu OperationPb/Cb, Pr/Cr Video Input Source SelectionRGB AV Hdcp Selecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemDirect Operation Auto PC AdjustmentTo store the adjusted parameters PC Adjust MenuManual PC Adjustment To store the adjusted data ResetMode free To clear the adjusted dataImage Image Level SelectionStandard Real Dynamic Image1 Image SEL. button StandardScreen Menu Screen Size AdjustmentDigital zoom + KeystoneCeiling RearPb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-Video JackStandard Cinema Dynamic Image1 Image SEL. button Natural Wide Keystone Picture Image Image AdjustmentImage Adjust Menu Pointer ModeColor Palette Color MMenu List Color M MenuGamma White balance Red/Green/BlueOffset Red/Green/Blue SharpnessSetting SettingLamp life control Lamp modeBackground Lamp controlPicture in Picture Color matching Edge blendingAdvanced color matching DynamicBlackCapture Hdmi setupLogo Logo selectChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Filter control Remote controlTo change the code for the remote control To reset the code for the remote controlOn start Power managementSecurity Security Key lockPIN code lock Change the PIN Code Change the PIN Code Lock settingRelease key ShutterProtection EffectFrame lock Video delay controlClosed caption Filter counter Filter replacement iconTest pattern Factory defaultFilter Instructions Maintenance and CareService Parts No 350 Reset the filter counter and the scroll counter p.66Scroll counter Resetting the Filter CounterResetting the Scroll Counter Filter counterLamp Status Display Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp ManagementLamp 1 / 2 Replace indicators Lamp ReplacementIndicators Lamp Handling Precautions Optional Color Wheel Installation Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingAppendix Power is turned off Network Information Image AdjustMenu Tree Computer Input/Video InputScreen PC AdjustSystem Image SelectSetting Projector is operating normally Indicators and Projector ConditionLamp Replace 1 Projector is detecting abnormal conditionFilter replacement icon Display Compatible Computer SpecificationsON-SCREEN Resolution Freq.kHz Freq.Hz30.000 List of Picture in Picture Supported Signal Format for Optional BoardTechnical Specifications Optional Parts Output Configurations of TerminalsInput Logo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Unit inch mm DimensionsEdge blending How to adjust multiple screensColor matching Page Page Corporate offices