Christie Digital Systems DHD800 user manual Computer Input, Computer System Selection

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 82-83). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.)

One of the following messages may appear when:

Auto	When the projector cannot recognize the
	connected signal conforming to the provided PC
	Systems, the “Auto” is displayed on the PC System
	Menu icon and the Auto PC Adjustment function
	works to display proper images. If the image is
	not projected properly, a manual adjustment is
	required. (pp.37–38.)

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 73.)

Mode 1	The preset system is manually adjusted in the PC
	Adjust Menu. The adjusted data can be stored in
	the Mode 1–10. (pp.37-38)
	PC systems provided in this projector is chosen.
SVGA 1
	The projector chooses a proper system provided in
	the projector and displays it.

=Mode 1 and SVGA 1 are examples.

PC SYSTEM MENU

PC System Menu icon

Selected system is displayed.

PC SYSTEM MENU

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen Menu.
	Use the Point  buttons to move the red frame pointer

to the PC System Menu icon.

2Use the Point 54 buttons to move the red arrow pointer to the desired system, and then press SELECT button.

PC System Menu icon Selected system is displayed

Systems in this dialog box can be selected.

Custom Mode (1–10) set in PC Adjust Menu. (pp.37-38)

DHD800 User Manual	35
020-000244-01 Rev.1 (08-2010)