Christie Digital Systems DHD800 user manual Reset the filter counter and the scroll counter p.66

003-003378-01

DHD800 User Manual

020-000244-01 Rev.1 (08-2010)

DHD800

CAUTION

- Do not put anything into the air vents. Doing so may result in malfunction of the projector.

- In the event of installation/replacement of the filter cartridge, turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens or optical elements inside the projector. Such condition may degrade the quality of the projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE

Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer.

Installing the Filter Cartridge

Maintenance and Care

1	Turn off the projector, press the Main On/Off Switch to	Filter cover
	Off and unplug the AC power cord from the AC outlet.
2	First, clean up the dust on the projector and around the
	air vents.
3	Open the filter cover. (See the right figure.)
4	Put a filter cartridge into the position and close the filter
	cover. Make sure that the filter cartridge is properly and

fully inserted.

5Connect the AC power cord to the projector and turn on the projector.

Filter cartridge

6Reset the filter counter and the scroll counter (p.66).

Tab

Note:

•When taking out the filter cartridge, put your finger on the filter cartridge’s tab and then pull.

LModel No. of your projector

LReplacement Filter Cartridge Type No.

(Service Parts No. 610 350 7811)

65