Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.
Note:
•To inverse or reverse the image, set the ceiling function to “On.” (pp.41, 45) •The projector cannot be operated at an altitude above 3,000 meters.
Positioning Precautions
Avoid positioning the projector as described below when installing.
20˚ |
|
| Do not roll the projector more | 10˚ | |
|
| ||||
|
|
|
|
| |
|
|
|
| than 20 degrees from side to |
|
|
|
|
| side. |
|
20˚ |
| ||||
|
| ||||
Do not put the projector on either side to project an image.
10˚
10˚
10˚
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any
Cautious use of equipment with laser technology
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality of the projector, and will void any applicable warranties.
DHD800 User Manual | 7 | |
|