Christie Digital Systems DHD800 user manual Operating with Projector Control

Basic Operation

Operating with Projector Control

Zoom Adjustment

Press the ZOOM button and “Zoom” will be displayed on the screen. And then press the Point 54 buttons to zoom in and out the image.

Focus Adjustment

Press the FOCUS button and “Focus” will be displayed on the screen. And then press the Point 54 buttons to adjust the focus of the image.

Lens Shift Adjustment

Press the LENS SHIFT button and “Lens shift” will be displayed on the screen. Use the Point 544 buttons to position the screen to the desired point without having picture distortion.

The amount of lens shift range varies depending on the lens.

Press and hold the LENS SHIFT button for more than 5 seconds to return to the central position. See page 18 for details.

Auto PC Adjustment

Operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 36 for details.

Light Function

Light function is used to turn on the lights on the side control and around terminals. To turn off the lights, press the Light button again.

Note:

•The buttons on the side control except for the LIGHT button and ON/STAND-BY button do not light up when the projector is in stand-by mode or during the cooling down period.

Side Control

SHUTTER button

LIGHT button

ZOOM button

LENS SHIFT button

FOCUS button

POINT buttons

INFORMATION button

AUTO PC ADJ. button

Zoom

Focus

Note:

•The arrow disappears at the maximum lens shift in each direction.

•The arrow turns red when the lens shift comes to the

Shutter Function

Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.60 for detail of setting for the Shutter function.

center position of the screen.

Note:

	• The SHUTTER button on the side control and the remote
	control cannot be effective when Shutter Protection is "On"
	in the Setting menu. (p.60)
	• The SHUTTER indicator on the projector's top lights blue
	when the shutter is closed. (pp.13, 79)
	• The projector will shut down automatically when the set
	time on Shutter management has passed. (p.60)
	• The Power management function does not work when the
	shutter is closed. (p.57)
28	DHD800 User Manual
	020-000244-01 Rev.1 (08-2010)