Connections
: Signal flow
6.Satellite tuner or television (VIDEO 3)
Digital audio output |
(optical) |
Video output |
S Video output
L (white)
Analog audio output 
R (red)
|
| ANTENNA | AM |
COMPONENT VIDEO |
| ||
INPUT 2 | INPUT 1 | OUTPUT |
|
|
| Y |
|
PB
|
| PR |
|
|
|
DIGITAL | COAXIAL | VIDEO 3 | VIDEO 2 | ||
IN | OUT | IN | OUT | IN | |
OPTICAL | OPTICAL |
|
|
|
|
21
|
|
| IN |
|
|
|
|
|
| COAXIAL |
|
|
|
IN | IN | OUT | IN | IN | OUT | IN |
GND |
|
|
|
|
|
|
L |
|
|
|
|
|
|
R |
|
|
|
|
|
|
PHONO | CD |
| TAPE | VIDEO 3 | VIDEO 2 | |
FM 75
ZONE 2
LINE OUT
L
RREMOTE CONTROL
VIDEO 1 | DVD | MONITOR |
| ZONE 2 | |
OUT | IN | IN | OUT |
| |
|
|
|
| V | 12V |
|
|
|
| TRIGG | |
|
|
|
|
| OUT |
|
|
|
| S | IR IN |
|
|
|
|
| |
OUT | IN | FRONT | SURR | CENTER | |
L
R
SUB
VIDEO 1WOOFER DVD
Component video output
Video output
S Video output |
5. VCR (VIDEO 1)
Video input |
S Video input |
L (white)
Analog audio output
R(red) L (white)
Analog audio input R (red)
5. Connecting a video cassette recorder (VIDEO 1)
Using RCA video cables, connect the video output jack (composite) of the video cassette recorder to the VIDEO 1 V IN jack of the TX- SR701/701E/601/601E and connect the video input jack of the video cassette recorder to the VIDEO 1 V OUT jack of the
With the initial settings of the
If you connect the video cassette recorder to the COMPONENT VIDEO INPUT 1 jacks, this must be changed at “Input Setup” → “Component Video” (see page 53).
Using RCA audio cables, connect the audio output jacks of the video cassette recorder to the VIDEO 1 IN audio jacks of the TX- SR701/701E/601/601E and connect the audio input jacks of the video cassette recorder to the VIDEO 1 OUT audio jacks of the TX- SR701/701E/601/601E. Make sure that you properly connect the left channels to the L jacks and the right channels to the R jacks.
If you are connecting a digital output device to the VIDEO 1 jack instead of a VCR, connect it to either the DIGITAL IN COAX jack or DIGITAL IN OPT jack depending on the type of connector on the device.
With the initial settings of the
If you connect the digital audio output, be sure to make the appropriate changes at “Input Setup” → “Digital Input” (see page 52).
6.Connecting a satellite tuner, television, or settop box (VIDEO 3)
Using an RCA video cable, connect the video output jack (composite) of the device to the VIDEO 3 V IN jack of the TX- SR701/701E/601/601E. Or if the device has an S video output jack, connect it to the VIDEO 3 S IN jack of the
With the initial settings of the
If you connect the device to the COMPONENT VIDEO INPUT 1 jacks, this must be changed at “Input Setup” → “Component Video” (see page 53).
Using an RCA audio cable, connect the audio output jack of the device to the VIDEO 3 IN audio jacks of the
If the device has a digital output, connect it to either the DIGITAL IN COAXIAL jack or the DIGITAL IN OPTICAL jack of the TX- SR701/701E/601/601E depending on the type of connector on the device.
With the initial settings of the
If the digital connection is made at a different jack, this must be changed at “Input Setup” → “Digital Input” (see page 52).
19