Audio Adjust
Front Expander
In the
On: Select to turn on the front expander function to simulate a wider sound space.
Off: Select to turn off the front expander function for a normal sound space.
Virtual Surr Level
In the
Dialog Enhance
If the dialog from the center channel is difficult to hear in the
On: Select to enhance the vocal ranges of the center channel signal.
Off: Select to output the center channel signal at the regular level and frequency characteristics.
Front Effect (Orchestra, Unplugged,
Some live recordings contain acoustic reverberation. When you play these sources, more reverberation will be applied by the DSP, creating too much reverb effects and the sound loses frame or presence. In this case, set this setting to “Off” so that no reverberation from the DSP will be applied to the sound output from the three front channels. With this setting, the sound source is played as it is without any further reverberation.
Reverb Level (Orchestra, Unplugged,
This setting allows you to adjust the depth of acoustic reverberation to match the playback source material, the acoustics of your room, and such other factors.
Select from the three settings “Low,” “Middle,” and “High.”
Reverb Time (Orchestra, Unplugged,
Adjust the reverb time to match the source being played back and the acoustics of the room. Select from the three settings “Short,” “Middle,” and “Long.”
59