Onkyo TX-SR701E, TX-SR601E instruction manual If one of the messages shown below appears

Page 77

Troubleshooting guide

If one of the messages shown below appears

“Not available with headphones use”

Operation not allowed because headphones are plugged into the TX-SR701/701E/601/601E.

“Not available with Multichannel use”

Operation not allowed while the multi-channel output is being used.

“Not available in this Sp Config”

Will not work with the current speaker configuration settings.

“Not available in Zone 2 mode”

Setting not allowed because the Zone 2 mode is turned on.

“Only available with Dolby D”

No setting other than Dolby Digital can be set.

“Not available in this Listening mode”

Will not work with the current listening mode.

“Not available with this signal”

The listening mode cannot be selected with the current input source.

“Not available with Muting”

Operation not allowed because the muting is activated.

“Zone 2 is not On”

Will not work because the Zone 2 has not been turned on.

Also refer to the respective instruction manuals of the CD player, DVD player, video cassette recorder, TV monitor, etc., that compose your entertainment system.

The TX-SR701/701E/601/601E contains an internal microcomputer that performs high-level operations. However, on extremely rare occasions, noise or interference from an external source or static electricity may cause faulty operation. If this occurs, unplug the power cord from the wall outlet, wait five or more seconds, and then plug it back in. This should correct the situation.

*To reset the surround mode and other settings to the factory default settings, hold down the VIDEO 1 button with the TX- SR701/701E/601/601E turned on and then press the STANDBY/ON button. “CLEAR” appears in the front display and the TX-SR701/701E/601/601E enters the standby state.

77

Image 77
Contents TX-SR701/701E TX-SR601/601E Avis Important Safety InstructionsPrecautions Contents Contents TX-SR701/701E Amplifier Features FeaturesBefore using this unit Supplied accessoriesSetting the voltage selector Worldwide models only Using the remote controllerTX-SR601E Front panel facilitiesTX-SR701E Front panel facilities Audio Selector button Listening mode or digital input format indicators Muting indicatorTuning indicators Sleep indicatorRemote controller Input Selector buttons Remote controllerLight button RC-533M only VOL buttonImproper connection Inserted completely ConnectionsLeft white Audio connection cable Right red Video connection cable Coaxial cable Optical cableConnections Connecting a compact disc player CD Connecting your audio componentsConnecting a turntable Phono TX-SR701/701E only Signal flowflow of the video signals is as follows Connecting your video componentsConnecting a DVD Player with 5.1-Channel Output Connecting a DVD player DVD Connecting a DVD Player with 2-Channel L/R Audio OutputVideo output White Analog audio output R red Connecting a video cassette recorder VideoMonitor OUT Connecting a television monitor or projector Monitor OUT12V Trigger Zone 2 terminal Connecting video camera, etc. Video 4 InputPRE OUT TX-SR701/701E only TX-SR701/701E/601/601E Connecting Block IR Receiver From connecting block Mini plug cableCabinet Signal flow IR Receiver Connecting block Remote Controller Main roomWhen using the Zone 2 Speakers terminals Connecting the remote zone Zone 2 speakersWhen using the Zone 2 PRE OUT terminals TX-SR701/701E only When using the Zone 2 Line OUT terminalsPower off function Power on/ready functionDirect change function Dimmer functionStandard speaker setup for surround sound Connecting speakersSpeaker placement Important points regarding speaker placementUsing the speaker cable labels Connecting speakersConnecting a subwoofer Connecting the surround back speakers TX-SR701/701E onlyStrip away approx /8 inch 15 mm Wire insulation Connecting speakersConnecting the speaker cable Turning on the power from the remote controller Connecting the powerTurning on the power Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker Configuration Configuring the speakersDisplaying the Main Menu TX-SR601/601E Configuring the speakersTX-SR701/701E Speaker Distance menu appears Calibrating the speaker levels Use the and cursor buttons to select Left Using the remote controller Press the Test buttonPress the Test button to complete the procedure Displaying the Main Menu and exiting the menu Buttons used for navigating through the menusPress the Tuner input source button Tuned in stereo Auto mode Band FrequencyListening to Radio Broadcasts Selecting a preset radio station Presetting a radio stationErasing a preset radio station Listening to Radio BroadcastsPTY program types in Europe What is RDS?Listening to RDS broadcasts European models only Listening to RDS broadcasts European models only Preset RT/PTY/TPDisplaying Radio Text RT Performing a TP scanBasic operation Master VolumeSelecting an Audio Component Rcvr Mode CH SEL Audio SEL Level Selecting the type of audio input signalSelecting an Audio Component Tape Audio SelectorChanging the display Temporarily changing the speaker output levelsTo change the display of the input source from Tape to MD Enjoying DVD multichannel audio playback Using the sleep time remote controller onlyListening with headphones Temporarily turning off the sound Switching the displayListening Modes Listening Modes TX-SR701/701E Listening mode buttons Selecting a listening mode TX-SR701/701ETip Re-EQWhile playing back Analog/PCM sources Re-EQ function for movies TX-SR701/701E onlyCine Fltr Selecting a listening mode TX-SR601/601ETX-SR601/601E Listening mode buttons Press the Cine Fltr button on the remote controller Digital Input Input SetupSetup Procedure Select the desired input source Component Video Input SetupIntelliVolume Analog/PCM/D. F ch source For e. PCM fs 96kHz source g. D. F. Mono sourceDigital Format source F. Mono sourceTo display the Hardware Config menu Hardware SetupHardware Config To display the Preference menu PreferencePreference Audio Adjust Audio AdjustSetup Procedure Press the Audio Adjust button Audio Adjust Dialog Enhance Front ExpanderVirtual Surr Level Enjoying music in the remote zone Using the buttonsAdjusting the volume for the remote zone Recording the input source REC OUT selector RecordingREC OUT OFF Recording a source different from that you are listening toRecording both the audio and video RecordingCalling up a preset radio station Using remote controllerControlling an Onkyo cassette tape deck VOLDVD Mode Using remote controllerPress the DVD Mode button Controlling an Onkyo DVD playerPress the CD Mode button CD Mode DiscControlling an Onkyo CD player On StandbyPress the SAT/MD Mode button SAT/MD ModeControlling an Onkyo MD recorder REC RecordEntering a pre-programming code When entering the code of Onkyo DVD playersLearning a pre-programming code DisplayPre-programming codes Entering a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode VCR Mode VOL TV/VCR MutingMacro 1 Macro Programming procedureLight Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again Press and release the same button againExecuting the macro Using the macro functionProgramming the macro Erasing all commands and macros that have been programmed Using the macro functionErasing a macro from the Macro 1 or 2 button Press the Macro 1 or 2 button againTroubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Specifications TX-SR701/701EAmplifier Section Tuner Section Specifications TX-SR601/601EOnkyo Europe Electronics GmbH Onkyo U.S.A. CorporationPage Page Page Page Page Page