Onkyo TX-SR701E, TX-SR601E instruction manual Buttons used for navigating through the menus

Page 36

Configuring the speakers

Using the remote controller

1. Press the TEST button.

You will hear a pink noise which will be emitted from the front left speaker.

(1)Remember the volume level of this noise and then press the CH SEL button. The TX-SR601/601E will now emit the pink noise from the center speaker.

(2)Using the LEVEL / buttons, adjust the volume level of the noise from the center speaker so that it is at the same level as that was emitted from the front left speaker.

(3)Press the CH SEL button again. The TX-SR601/601E will now emit the pink noise from the front right speaker.

Use the LEVEL / buttons to adjust the volume of the noise from the front right speaker so that it is the same level as that was emitted from the center speaker.

(4)Use the CH SEL button to select other speakers and adjust the volumes until all speakers are adjusted to the same level.

The pink noise level can be adjusted to anywhere between –12 and +12 decibels for all speakers in 1-decibel increments. For subwoofer, values between –15 and +12 dB can be set.

2. Press the TEST button to complete the procedure.

Buttons used for navigating through the menus

You can change settings in the Setup Menu using the buttons on the front panel and on the remote controller.

The buttons on the remote controller correspond to those on the TX- SR701/701E/601/601E as shown below.

Buttons on remote controller

Buttons on TX-SR701/701E/

601/601E

 

 

 

Displaying the Main Menu and exiting the menu

SETUP

SETUP

Selecting a menu or menu item

(upper edge of

UP

ENTER button)

 

(lower edge of

DOWN

ENTER button)

 

Setting the value

(left edge of

LEFT

ENTER button)

(right edge of

RIGHT

ENTER button)

 

Selecting the menu

ENTER

ENTER

Returning to the previous screen

RETURN

RETURN

36

Image 36
Contents TX-SR701/701E TX-SR601/601E Important Safety Instructions AvisPrecautions Contents Contents Features TX-SR701/701E Amplifier FeaturesSupplied accessories Before using this unitSetting the voltage selector Worldwide models only Using the remote controllerFront panel facilities TX-SR701ETX-SR601E Front panel facilities Audio Selector button Muting indicator Listening mode or digital input format indicatorsTuning indicators Sleep indicatorRemote controller Remote controller Input Selector buttonsLight button RC-533M only VOL buttonConnections Improper connection Inserted completelyLeft white Audio connection cable Right red Video connection cable Coaxial cable Optical cableConnections Connecting your audio components Connecting a compact disc player CDConnecting a turntable Phono TX-SR701/701E only Signal flowConnecting your video components Connecting a DVD Player with 5.1-Channel Outputflow of the video signals is as follows Connecting a DVD Player with 2-Channel L/R Audio Output Connecting a DVD player DVDConnecting a video cassette recorder Video Video output White Analog audio output R redConnecting a television monitor or projector Monitor OUT Monitor OUTConnecting video camera, etc. Video 4 Input PRE OUT TX-SR701/701E only12V Trigger Zone 2 terminal From connecting block Mini plug cable TX-SR701/701E/601/601E Connecting Block IR ReceiverCabinet Signal flow IR Receiver Connecting block Remote Controller Main roomConnecting the remote zone Zone 2 speakers When using the Zone 2 Speakers terminalsWhen using the Zone 2 PRE OUT terminals TX-SR701/701E only When using the Zone 2 Line OUT terminalsPower on/ready function Power off functionDirect change function Dimmer functionConnecting speakers Standard speaker setup for surround soundSpeaker placement Important points regarding speaker placementConnecting speakers Using the speaker cable labelsConnecting a subwoofer Connecting the surround back speakers TX-SR701/701E onlyConnecting speakers Connecting the speaker cableStrip away approx /8 inch 15 mm Wire insulation Connecting the power Turning on the powerTurning on the power from the remote controller Connecting antennas Connecting the included antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageConfiguring the speakers Displaying the Main MenuSpeaker Configuration Configuring the speakers TX-SR701/701ETX-SR601/601E Speaker Distance menu appears Calibrating the speaker levels Using the remote controller Press the Test button Press the Test button to complete the procedureUse the and cursor buttons to select Left Buttons used for navigating through the menus Displaying the Main Menu and exiting the menuTuned in stereo Auto mode Band Frequency Listening to Radio BroadcastsPress the Tuner input source button Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsWhat is RDS? Listening to RDS broadcasts European models onlyPTY program types in Europe Preset RT/PTY/TP Listening to RDS broadcasts European models onlyDisplaying Radio Text RT Performing a TP scanMaster Volume Selecting an Audio ComponentBasic operation Selecting the type of audio input signal Rcvr Mode CH SEL Audio SEL LevelSelecting an Audio Component Tape Audio SelectorTemporarily changing the speaker output levels To change the display of the input source from Tape to MDChanging the display Using the sleep time remote controller only Listening with headphonesEnjoying DVD multichannel audio playback Switching the display Temporarily turning off the soundListening Modes Listening Modes Selecting a listening mode TX-SR701/701E TX-SR701/701E Listening mode buttonsTip Re-EQRe-EQ function for movies TX-SR701/701E only While playing back Analog/PCM sourcesSelecting a listening mode TX-SR601/601E TX-SR601/601E Listening mode buttonsCine Fltr Press the Cine Fltr button on the remote controller Input Setup Setup Procedure Select the desired input sourceDigital Input Input Setup IntelliVolumeComponent Video For e. PCM fs 96kHz source g. D. F. Mono source Analog/PCM/D. F ch sourceDigital Format source F. Mono sourceHardware Setup Hardware ConfigTo display the Hardware Config menu Preference PreferenceTo display the Preference menu Audio Adjust Setup Procedure Press the Audio Adjust buttonAudio Adjust Audio Adjust Front Expander Virtual Surr LevelDialog Enhance Using the buttons Adjusting the volume for the remote zoneEnjoying music in the remote zone Recording Recording the input source REC OUT selectorREC OUT OFF Recording a source different from that you are listening toRecording Recording both the audio and videoUsing remote controller Calling up a preset radio stationControlling an Onkyo cassette tape deck VOLUsing remote controller DVD ModePress the DVD Mode button Controlling an Onkyo DVD playerCD Mode Disc Press the CD Mode buttonControlling an Onkyo CD player On StandbySAT/MD Mode Press the SAT/MD Mode buttonControlling an Onkyo MD recorder REC RecordWhen entering the code of Onkyo DVD players Entering a pre-programming codeLearning a pre-programming code DisplayEntering a pre-programming code Pre-programming codesOperating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable ModeOperating your programmed remote controller VCR Mode VCR ModeTV Mode TV Mode VCR Mode VOL TV/VCR MutingProgramming procedure LightMacro 1 Macro Erasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again Press and release the same button againUsing the macro function Programming the macroExecuting the macro Using the macro function Erasing all commands and macros that have been programmedErasing a macro from the Macro 1 or 2 button Press the Macro 1 or 2 button againTroubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications TX-SR701/701E Amplifier SectionSpecifications TX-SR601/601E Amplifier Section Tuner SectionOnkyo U.S.A. Corporation Onkyo Europe Electronics GmbHPage Page Page Page Page Page