Front panel facilities
Input source buttons (DVD, VIDEO
These buttons are used to select the input source.
Press these buttons to select the input source for the main zone.
To select the input source for the remote zone (Zone 2) or recording out (Rec Out), first press the ZONE 2 or REC OUT button, and then press the desired input source button. The input channel with its indicator lit red is output to REC OUT and the one with its indicator lit green is output to ZONE 2.
AUDIO SELECTOR button [42]
Press to select the type of audio input signal.
DIRECT/PURE AUDIO button and indicator
PHONES jack [44]
This is a standard stereo jack for connecting stereo headphones.
REC OUT, ZONE 2, OFF, LEVEL 
/ 
buttons, and ZONE 2 indicator [60, 61]
The REC OUT and ZONE 2 buttons allow you to use the TX- SR701/701E/601/601E to output to a remote zone (Zone 2) or to another component for recording (Rec Out).
To turn off the output, press the OFF button. The ZONE 2 indicator lights when a signal is output to the remote zone (Zone 2). When the ZONE 2 indicator is off, then either output to the remote zone is turned off or Rec Out is selected. Press the LEVEL 
/ 
buttons to enter the mode for adjusting the volume in the remote zone (Zone 2).
Note:
The Rec Out and Zone 2 buttons use the same circuit and therefore cannot be used at the same time. When REC OUT is selected, nothing is output to Zone 2. When ZONE 2 is selected, REC OUT is automatically fixed to SOURCE.
10