Recording
REC OUT OFF
STANDBY/ON
POWER
ON 
OFF
REC OUT | ZONE 2 | OFF |
AUDIO | MASTER VOLUME |
ADJUST | SETUP RETURN |
| TUNING |
PRESET
STANDBY
LISTENING MODE
LEVEL | DISPLAY | RT/PTY/TP | STEREO SURROUND | THX | DSP |
| MEMORY | FM MODE | ENTER | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHONES | DIRECT/ | AUDIO |
| PURE AUDIO | SELECTOR |
| PURE AUDIO |
|
DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | TAPE | TUNER | CD | PHONO |
| VCR 1 | VCR 2 |
|
|
|
|
|
|
VIDEO 4 INPUT
DIGITAL | S VIDEO | VIDEO | L AUDIO R |
Input source buttons
Notes:
•You cannot record the surround effects.
•Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be output to the DIGITAL OUTPUT (COAXIAL) and DIGITAL OUTPUT (OPTICAL) output.
•There are some restrictions on recording digital signals. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.
•You cannot record the source connected to the
•If you change the input source during recording, you will record the signals from the newly selected input source.
•Digital input signals are only output to the digital outputs and analog input signals are only output to the analog outputs. There is no conversion from digital to analog or vice versa. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.
Recording the input source (REC OUT selector)
When using the
Recording the same source that you are listening to:
1.Press the input source button for the source that you want to record.
DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | TAPE | TUNER | CD | PHONO |
| VCR 1 | VCR 2 |
|
|
|
|
|
|
2. Press the REC OUT button repeatedly until “Rec Sel : SOURCE” appears in the front display.
3.Start recording at the recording device connected to the TAPE OUT jacks.
Note:
Be aware that if you change the input source that you are watching (or listening to), the selected source will be recorded.
Recording a source different from that you are listening to:
The
1. While playing the DVD, press the REC OUT button.
2.Within 5 seconds, press the input source button of the source that you wish to record.
In this example you would press the CD source button. The signal from the CD player is now output to the TAPE OUT jacks.
DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | TAPE | TUNER | CD | PHONO |
| VCR 1 | VCR 2 |
|
|
|
|
|
|
3.Start recording at the recording device connected to the TAPE OUT jacks.
You can press the REC OUT button to display which input source is selected for recording. When “Rec Sel: Off” is displayed, no signal is output for recording.
To confirm the settings, press the REC OUT button. The current settings will appear for 5 seconds in the front display.
To turn off the Rec Out, press the REC OUT button and then press the OFF button within five seconds.
Notes:
•You cannot use the REC OUT selector to record video signals.
•Be aware that the ZONE 2 and REC OUT selectors use the same circuit and therefore cannot be used at the same time.
•Even if you change the input source that you are listening to, the input source that is selected for recording will not change. However, if you have selected FM (or AM) as the source to be recorded and the AM (or FM) source button is pressed, the source being recorded will be changed to the AM (or FM) input signal.
61