Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual Enable/Disable Vlan

Page 20

2.6.1 Enable/Disable VLAN

In the 802.1Q VLAN page, you can enable/disable the tag-based VLAN function by clicking the (Enable) or (Disable) hyperlink beside the page header:

¾Enable – to activate the tag-based VLAN function (this will disable the port-based VLAN function).

¾Disable – to de-activate the tag-based VLAN function. (Any existing tag-based VLAN entries will be retained although tag-based VLAN functions will be disabled. Any retained port-based VLAN entries will auto enable.)

20

Image 20

Contents Version 24x 10/100/1000Mbps ports + 2 paired SFP Ports8x 10/100/1000Mbps ports + 16 SFP Ports Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign an IP address by Dhcp server Dhcp ClientAssign a fixed IP address ARL Aging User Management Reset System Command Line Interface CLI Hyper Terminal Setup OptionsSwitch Management Commands In Console „ Login System„ Get System Information „ Get Current Network Settings„ Help Menu „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Standards Compliance „ Interfaces„ Buffer Memory „ Packet Forwarding and Filtering Rates„ Power „ Dimensions„ Weight „ Electromagnetic Emissions Class a „ Safety