Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual Enable Mirror

Page 34

2.8.2 Enable Mirror

¾Step 1: Choose the Mirror option as Mirror All Frames.

¾Step 2: Choose the Monitored Port (ie Port16)

¾Step 3: Choose the Capture Port (ie Port8)

¾Step 4: Click the Apply button to enable the mirroring settings.

34

Image 34

Contents 8x 10/100/1000Mbps ports + 16 SFP Ports 24x 10/100/1000Mbps ports + 2 paired SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign a fixed IP address Dhcp ClientAssign an IP address by Dhcp server ARL Aging User Management Reset System Switch Management Commands In Console Command Line Interface CLIHyper Terminal Setup Options „ Login System„ Help Menu „ Get Current Network Settings„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Buffer Memory „ Standards Compliance„ Interfaces „ Packet Forwarding and Filtering Rates„ Weight „ Electromagnetic Emissions Class a „ Power„ Dimensions „ Safety