Alloy Computer Products GSS-8T16SFP Upgrade Firmware Via Tftp or BOOTP/TFTP, Reboot System

Page 56

Upgrade Firmware Via TFTP or BOOTP/TFTP

Press “UF” or “uf” to start firmware upgrade progress via TFTP server.

Choose “1” to update firmware via TFTP. Enter TFTP server IP address and firmware filename.

Choose “2” to update firmware via BOOTP/TFTP.

After the GSS-24T2SFP firmware upgrade process is finished. Press “IG” or “ig” to check firmware version after login.

Reboot System

Press “RB” or “rb” to restart this system.

56

Image 56

Contents Version 24x 10/100/1000Mbps ports + 2 paired SFP Ports8x 10/100/1000Mbps ports + 16 SFP Ports Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign an IP address by Dhcp server Dhcp ClientAssign a fixed IP address ARL Aging User Management Reset System Command Line Interface CLI Hyper Terminal Setup OptionsSwitch Management Commands In Console „ Login System„ Get System Information „ Get Current Network Settings„ Help Menu „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Standards Compliance „ Interfaces„ Buffer Memory „ Packet Forwarding and Filtering Rates„ Power „ Dimensions„ Weight „ Electromagnetic Emissions Class a „ Safety