Alloy Computer Products GSS-8T16SFP „ Standards Compliance, „ Interfaces, „ Buffer Memory

Page 58

3 Specifications

„Standards Compliance

IEEE 802.3 10BaseT Ethernet

IEEE 802.3u 100BaseTX Fast Ethernet

IEEE 802.3ab 1000Base Gigabit Ethernet

IEEE 802.3x flow control both on half and full duplex

IEEE 802.1q Tag-based VLAN

„Interfaces

24 1000BaseTX RJ-45 connector ports,

2 mini-GBIC ports

1 RS-232 terminal port

„Buffer Memory

512MB for packet buffers 8K entries for MAC

4K entries for VLAN

„Packet Forwarding and Filtering Rates

1Gbps Ethernet: 1,488,000 packets per second per port

100Mbps Ethernet: 148,800 packets per second per port

10Mbps Ethernet: 14,880 packets per second per port

„Environment

Operation temperature: 5 to 45 centigrade

Operating humidity: 10%-90%, non-condensing

Storage temperature: -20 to 70 centigrade

„LED Panel Display

1 power LED: Green (normal)

1 Diagnostics LED: Green (normal), Blinking (reset configuration)

Port LEDs: Port1 – 24, left corner of each RJ-45 port, Green (link ok), Blinking (activity)

Speed LEDs: Port1 – 24, right corner of each RJ-45 port, Green (1Gbps), Vanish (10Mbps or 100Mbps)

Fiber LEDs: Port1 – 2, Green (link ok), Blinking (activity)

58

Image 58
Contents 8x 10/100/1000Mbps ports + 16 SFP Ports 24x 10/100/1000Mbps ports + 2 paired SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign a fixed IP address Dhcp ClientAssign an IP address by Dhcp server ARL Aging User Management Reset System Switch Management Commands In Console Command Line Interface CLIHyper Terminal Setup Options „ Login System„ Help Menu „ Get Current Network Settings„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Buffer Memory „ Standards Compliance„ Interfaces „ Packet Forwarding and Filtering Rates„ Weight „ Electromagnetic Emissions Class a „ Power„ Dimensions „ Safety