2 Configuration
2.1Port Status
The Port Status page provides link status information.
This page provides the following information:
Port – to specify a port on the switch
Link Status – displays the port link status: Up / Down
Speed / Duplex – displays the current link speed (1G / 100M / 10M bps) and duplex mode (Full / Half) when the port is active.
NOTE: Only full duplex mode is supported on links whose speed is 1Gbps.
Flow Control – displays the flow control capability as Enable / Disable for the port.
The status for columns: Speed/Duplex and Flow Control will not display while the port link is down. (The sign
If any trunk groups have been defined then that group should be regarded as one logical port (e.g. Trk1 in above figure contains Ports9 & 10 in one logical grouping). The trunk member ports will not display individually. Section 2.7 (Trunk) describes port trunking in detail.
Click the Refresh button to manually get the most current link status for all ports.
8