Alloy Computer Products GSS-24T2SFP, GSS-8T16SFP user manual System Setup

2.11 System Setup

System Setup page provides management information for the switch. The page shown below can be activated by clicking on the System Setup menu under the System section.

The following parameters can be configured / displayed:

„Model Name – the model name of this switch (read-only)

„Chip Version – the switch chipset version (read-only)

„Firmware Version – the current version running on the switch (read-only)

„DHCP Client – DHCP client status

„IP Address – the IP address to manage this switch.

„Subnet mask – the network mask to identify the sub-network address

„Gateway – the IP address of the default gateway

„MAC address – the MAC address for the configuration port interface (read-only)

„ARL Aging – the aging time of dynamic ARL entry in address table

45