Alloy Computer Products GSS-24T2SFP, GSS-8T16SFP user manual 2 802.1Q Vlan Port Configuration

Page 21

2.6.2 802.1Q VLAN Port Configuration

Click the Port number to configure the port for 802.1q VLAN.

The following figure shows the 802.1Q VLAN Port Configuration page by port. (e.g. Port10)

You can select an individual port for configuring the 802.1q settings in the following fields:

¾PVID – enter a valid VLAN ID(1-4094), the PVID must be one of the existing VLAN group ID.

¾UnTag Frame – Accept or drop incoming untagged frames.

¾Tag Frame – Accept or drop incoming tagged frames.

Finally, there are 2 buttons to select:

Apply: To submit the port configuration settings to the switch.

Back: To revert back to the 802.1q main setting page without saving.

21

Image 21
Contents 24x 10/100/1000Mbps ports + 2 paired SFP Ports 8x 10/100/1000Mbps ports + 16 SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features „ IP address Managing The SwitchConfiguration Functions for the Switch Port Status ConfigurationPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Vlan and 802.1Q Vlan can not co-exist at the same time Port-Based VlanAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service „ Scheduling Method 1 Get/Refresh the Latest QOS SettingsEnable QOS Modify QOS Settings Rate Control Rate and Storm ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Dhcp Client Assign a fixed IP addressAssign an IP address by Dhcp server ARL Aging User Management Reset System Hyper Terminal Setup Options Command Line Interface CLISwitch Management Commands In Console „ Login System„ Get Current Network Settings „ Help Menu„ Get System Information „ User Management „ Configure Network„ Reboot System „ Upgrade Firmware Via Tftp or BOOTP/TFTP„ Logout „ Reboot System After Write Default„ Interfaces „ Standards Compliance„ Buffer Memory „ Packet Forwarding and Filtering Rates„ Dimensions „ Power„ Weight „ Electromagnetic Emissions Class a „ Safety