Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual Firmware Update Via BOOTP/TFTP

Page 48

2.11.1.1 Firmware Update Via BOOTP/TFTP

Before performing the firmware update, please correctly prepare a BOOTP/TFTP server and the firmware file which will be uploaded to the switch by the TFTP server. (Please refer to the TFTP software vendor’s instruction guide for setting up the TFTP server).

When the BOOTP/TFTP server and the firmware file are ready, click the Apply button to start the firmware update through the any RJ-45 port on the switch.

The time for processing the firmware update will be approximately 50 seconds.

48

Image 48

Contents 24x 10/100/1000Mbps ports + 2 paired SFP Ports 8x 10/100/1000Mbps ports + 16 SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Dhcp Client Assign a fixed IP addressAssign an IP address by Dhcp server ARL Aging User Management Reset System Command Line Interface CLI Hyper Terminal Setup OptionsSwitch Management Commands In Console „ Login System„ Get Current Network Settings „ Help Menu„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Standards Compliance „ Interfaces„ Buffer Memory „ Packet Forwarding and Filtering Rates„ Power „ Dimensions„ Weight „ Electromagnetic Emissions Class a „ Safety