Alloy Computer Products GSS-24T2SFP, GSS-8T16SFP user manual „ Power, „ Dimensions, „ Safety

Page 59

„Power

Input: 100-240VAC, 50/60Hz

Power consumption: 40 Watts max.

„Dimensions

440mm (W) × 184mm (D) × 44mm (H)

„Weight

2.3 Kg

„Electromagnetic Emissions: Class A

FCC, CE, VCCI, C-Tick

„Safety

CB

59

Image 59
Contents Version 24x 10/100/1000Mbps ports + 2 paired SFP Ports8x 10/100/1000Mbps ports + 16 SFP Ports Table of Content 11.3 ARL Aging User Management Introduction Main Features „ IP address Managing The SwitchConfiguration Functions for the Switch Port Status ConfigurationPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Vlan and 802.1Q Vlan can not co-exist at the same time Port-Based VlanAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service „ Scheduling Method 1 Get/Refresh the Latest QOS SettingsEnable QOS Modify QOS Settings Rate Control Rate and Storm ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign an IP address by Dhcp server Dhcp ClientAssign a fixed IP address ARL Aging User Management Reset System „ Login System Command Line Interface CLIHyper Terminal Setup Options Switch Management Commands In Console„ Get System Information „ Get Current Network Settings„ Help Menu „ User Management „ Configure Network„ Reboot System „ Upgrade Firmware Via Tftp or BOOTP/TFTP„ Logout „ Reboot System After Write Default„ Packet Forwarding and Filtering Rates „ Standards Compliance„ Interfaces „ Buffer Memory„ Safety „ Power„ Dimensions „ Weight „ Electromagnetic Emissions Class a