Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual Firmware Update

Page 46

2.11.1 Firmware Update

The GSS-24T2SFP web smart switch provides a firmware update feature, customized requests and system fault recovery. The page for this is shown below can be activated by clicking the Update link in System Setup page.

GSS-24T2SFP

This system supports both BOOTP/TFTP and TFTP to update the firmware. The TFTP server IP address and firmware filename needs to be correctly provided to the switch to start the firmware updating if the TFTP method is selected.

46

Image 46

Contents 8x 10/100/1000Mbps ports + 16 SFP Ports 24x 10/100/1000Mbps ports + 2 paired SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign a fixed IP address Dhcp ClientAssign an IP address by Dhcp server ARL Aging User Management Reset System Switch Management Commands In Console Command Line Interface CLIHyper Terminal Setup Options „ Login System„ Help Menu „ Get Current Network Settings„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Buffer Memory „ Standards Compliance„ Interfaces „ Packet Forwarding and Filtering Rates„ Weight „ Electromagnetic Emissions Class a „ Power„ Dimensions „ Safety