Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual 3 802.1Q Vlan Config

Page 22

2.6.3 802.1Q VLAN Config

The following figure displays the add/delete/edit function for 802.1q VLAN entries. Each VLAN entry has 3 parameters, VID, Tag Members and UnTag Members to be assigned.

After selecting the Create New VLAN, the figure shown as below will display:

¾VID – a unique VLAN ID, range is from 1 to 4094

¾Tag Members & UnTag Members – Click the U/T icon to switch between Non Member, Tag Member or Untag Member.

Select the VID (1-4094) and within the member row select the ports which will belong to this VLAN group. After these settings are completed, click the Create button to submit the data to the switch. Click the Cancel button to abort the actions and revert back to the VLAN Config page.

22

Image 22

Contents 8x 10/100/1000Mbps ports + 16 SFP Ports 24x 10/100/1000Mbps ports + 2 paired SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Assign a fixed IP address Dhcp ClientAssign an IP address by Dhcp server ARL Aging User Management Reset System Switch Management Commands In Console Command Line Interface CLIHyper Terminal Setup Options „ Login System„ Help Menu „ Get Current Network Settings„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Buffer Memory „ Standards Compliance„ Interfaces „ Packet Forwarding and Filtering Rates„ Weight „ Electromagnetic Emissions Class a „ Power„ Dimensions „ Safety