Alloy Computer Products GSS-8T16SFP, GSS-24T2SFP user manual

Page 24

If you would like to edit the parameters of an 802.1q VLAN, just select a VID to be changed (e.g. VID =300), then make the required changes and click the Apply button : Port 17 and Port18 are selected to be the tag members of this group.

24

Image 24

Contents 24x 10/100/1000Mbps ports + 2 paired SFP Ports 8x 10/100/1000Mbps ports + 16 SFP PortsVersion Table of Content 11.3 ARL Aging User Management Introduction Main Features Managing The Switch „ IP addressConfiguration Functions for the Switch Configuration Port StatusPort Configuration Page About the Copper/Fiber Media Auto-Detection Port Statistics UnicastPkts Port-Based Vlan Vlan and 802.1Q Vlan can not co-exist at the same timeAdd Port-Based Vlan Groups Page Delete Port-Based Vlan Groups Edit Port-Based Vlan Groups 802.1Q Vlan Enable/Disable Vlan 2 802.1Q Vlan Port Configuration 3 802.1Q Vlan Config Page Page Trunking Trunking Rules Page 2 Get/Refresh the Latest Trunk Settings Enable Trunk Modify Trunk Settings Disable Trunk Port Mirroring 1 Get/Refresh the Latest Mirror Settings Enable Mirror Modify Mirror Settings Disable Mirror QOS Quality of Service 1 Get/Refresh the Latest QOS Settings „ Scheduling MethodEnable QOS Modify QOS Settings Rate and Storm Control Rate ControlPage Storm Control Page System Setup Firmware Update Firmware Update Via Tftp Firmware Update Via BOOTP/TFTP Dhcp Client Assign a fixed IP addressAssign an IP address by Dhcp server ARL Aging User Management Reset System Command Line Interface CLI Hyper Terminal Setup OptionsSwitch Management Commands In Console „ Login System„ Get Current Network Settings „ Help Menu„ Get System Information „ Configure Network „ User Management„ Upgrade Firmware Via Tftp or BOOTP/TFTP „ Reboot System„ Reboot System After Write Default „ Logout„ Standards Compliance „ Interfaces„ Buffer Memory „ Packet Forwarding and Filtering Rates„ Power „ Dimensions„ Weight „ Electromagnetic Emissions Class a „ Safety