Stack Installation Guide for AT-2552XS L2 Data Center Switch
Installing a
QSFP+ MTHTP
Cable
Figure 33. Removing QSFP+ Dust Cover
7.Insert the fiber optic cable to the port on the transceiver, as shown in Figure 34, until it clicks in place.
Figure 34. Attaching a Fiber Optic Cable to an QSFP+ Transceiver
8. Repeat this procedure if you have other QSFP+ transceivers to install.
Perform the following procedure to install a QSFP+ MTHTP cable:
1.Remove the QSFP+ MTHTP cable from its shipping container and store the packaging material in a safe location.
2.Remove the dust cover from the chassis QSFP+ slot. See Figure 35 on page 64.
63