Allied Telesis AT-IFS802SP manual Sntp Commands Set, Start time End time, Minute, Timezone

96 AT-IFS802SP-80 User Manual

SNTP Commands Set

Netstar Commands	Level	Description	Example
sntp enable	G	Enable SNTP function	switch(config)#sntp enable
		Enable daylight saving time,
sntp daylight	G	if SNTP function is inactive,	switch(config)#sntp daylight
		this command can’t be
		applied.
		Set period of daylight
		saving time, if SNTP
sntp daylight-period	G	function is inactive, this	switch(config)# sntp daylight-period
[Start time] [End time]		command can’t be applied.	20060101-01:01 20060202-01:01
		Parameter format:
		[yyyymmdd-hh:mm]
		Set offset of daylight saving
sntp daylight-offset	G	time, if SNTP function is	switch(config)#sntp daylight-offset 3
[Minute]		inactive, this command
		can’t be applied.
		Set SNTP server IP, if
sntp ip	G	SNTP function is inactive,	switch(config)#sntp ip 192.169.1.1
[IP]		this command can’t be
		applied.
		Set timezone index, use
sntp timezone		“show sntp timzezone”
	G	command to get more	switch(config)#sntp timezone 22
[Timezone]
		information of index
		number
show sntp	P	Show SNTP information	switch#show sntp
show sntp timezone	P	Show index number of	switch#show sntp timezone
		time zone list
no sntp	G	Disable SNTP function	switch(config)#no sntp
no sntp daylight	G	Disable daylight saving time	switch(config)#no sntp daylight