Allied Telesis AT-IFS802SP manual Commands Level, Exec

AT-IFS802SP-80 User Manual 25

5.5 Commands Level

Modes	Access Method	Prompt	Exit Method	About This Mode1
				The user commands available at
				the user level are a subset of those
User EXEC	Begin a session with	switch>	Enter logout	available at the privileged level.
	your switch.		or quit.	Use this mode to
				• Perform basic tests.
				• Display system information.
				The privileged command is the
Privileged	Enter the enable	switch#	Enter disable	advanced mode.
EXEC	command while in		to exit.	Use this mode to
	User EXEC mode.			• Display advanced function status
				• Save configuration
	Enter the configure		To exit to
			privileged	Use this mode to configure those
Global	command while in	switch
			EXEC mode,	parameters that are going to be
Configuration	privileged EXEC	(config)#
			enter exit or	applied to your switch.
	mode.
			end
	Enter the vlan		To exit to
VLAN	database command	switch (vlan)#	user EXEC	Use this mode to configure VLAN-
database	while in privileged		mode, enter	specific parameters.
	EXEC mode.		exit.
			To exit
			to global
	Enter the interface		configuration
Interface	of fast Ethernet	switch	mode, enter	TUse this mode to configure
	command (with a		exit.	parameters for the switch and
configuration	specific interface)	(config-if)#	To exit to
				Ethernet ports.
	while in global		privileged
	configuration mode.		EXEC mode,
			enter exit or
			end.