Allied Telesis AT-IFS802SP manual LED Indicators, Led

12 AT-IFS802SP-80 User Manual

2.4 LED Indicators

The diagnostic LEDs that provide real-time information of system and optional status are located on the front panel of the industrial switch.The following table provides the description of the LED status and their meanings for the switch.

LED	Color	Status	Meaning
PWR	Green	On	The switch unit is power on
		Off	No power
R.M.	Green	On	The industrial switch is the master of X-Ring group
		Off	The industrial switch is not a ring master in X-Ring group
PWR1	Green	On	Power 1 is active
		Off	Power 1 is inactive
PWR2	Green	On	Power 2 is active
		Off	Power 2 is inactive
FAULT	Red	On	Power or port failure
		Off	No failure
	Green	On	A network device is detected.
	(Upper	Blinking	The port is transmitting or receiving packets from the TX device.
P9, P10 (RJ-	LED)
		Off	No device attached
45)
	Green	On	1000M
	(Lower
		Off	10/100M
	LED)
Link/Active		On	The SFP port is linking
	Green	Blinks	The port is transmitting or receiving packets from the TX device.
(P9, P10 SFP)
		Off	No device attached
		On	A network device is detected.
	Green	Blinking	The port is transmitting or receiving packets from the TX device.
P1 ~ P8		Off	No device attached
		On	The port is operating in full-duplex mode.
	Amber	Blinking	Collision of Packets occurs.
		Off	The port is in half-duplex mode or no device is attached.