Allied Telesis AT-IFS802SP manual SystemLog, Smtp and Event Commands Set

94 AT-IFS802SP-80 User Manual

SystemLog, SMTP and Event Commands Set

Netstar Commands	Level	Description	Example
systemlog ip	G	Set System log server IP	switch(config)# systemlog ip
[IP address]		address.	192.168.1.100
systemlog mode	G	Specified the log mode	switch(config)# systemlog mode both
[clientserverboth]
show systemlog	E	Displays system log.	Switch>show systemlog
show systemlog	P	Show system log client &	switch#show systemlog
		server information
no systemlog	G	Disable systemlog functon	switch(config)#no systemlog
smtp enable	G	Enable SMTP function	switch(config)#smtp enable
smtp serverip	G	Configure SMTP server IP	switch(config)#smtp serverip
[IP address]			192.168.1.5
smtp authentication	G	Enable SMTP	switch(config)#smtp authentication
		authentication
smtp account	G	Configure authentication	switch(config)#smtp account John
[account]		account
smtp password	G	Configure authentication	switch(config)#smtp password 1234
[password]		password
smtp rcptemail	G	Configure Rcpt e-mail	switch(config)#smtp rcptemail 1
[Index] [Email address]		Address	Alert@test.com
show smtp	P	Show the information of	switch#show smtp
		SMTP
no smtp	G	Disable SMTP function	switch(config)#no smtp
event device-cold-start			switch(config)#event device-cold-start
[SystemlogSMTPBoth]	G	Set cold start event type
			both
event authentication-failure		Set Authentication failure	switch(config)#event authentication-
[SystemlogSMTPBoth]	G
		event type	failure both
event ring-topology-change		Set X-ring topology	switch(config)#event ring-topology-
[SystemlogSMTPBoth]	G
		changed event type	change both
event systemlog		Set port event for system	switch(config)#interface fastethernet 3
	I		switch(config-if)#event systemlog both
[Link-UPLink-DownBoth]		log
event smtp	I	Set port event for SMTP	switch(config)#interface fastethernet 3
[Link-UPLink-DownBoth]			switch(config-if)#event smtp both
show event	P	Show event selection	switch#show event
no event device-cold-start	G	Disable cold start event	switch(config)#no event device-cold-
		type	start