Allied Telesis AT-IFS802SP manual Trunk Commands Set

80 AT-IFS802SP-80 User Manual

Trunk Commands Set

Netstar Commands	Level	Description	Example
aggregator priority	G	Set port group system	switch(config)#aggregator priority 22
[1~65535]		priority
aggregator activityport
[Group ID]	G	Set activity port	switch(config)#aggregator activityport 2
[Port Numbers]
		Assign a trunk group with
		LACP active.
		[GroupID] :1~3
		[Port-list]:Member port
aggregator group		list,This parameter could	switch(config)#aggregator group 1 1-4
[GroupID] [Port-list]		be a port range(ex.1-4) or	lacp workp 2
lacp	G	a port list separate by a	or
workp		comma(ex.2, 3, 6)	switch(config)#aggregator group 2 1,4,3
[Workport]		[Workport]:The amount of	lacp workp 3
		work ports, this value could
		not be less than zero or be
		large than the amount of
		member ports.
		Assign a static trunk group.
		[GroupID] :1~3	switch(config)#aggregator group 1 2-4
aggregator group		[Port-list]:Member port	nolacp
[GroupID] [Port-list]	G	list,This parameter could	or
nolacp		be a port range(ex.1-4) or	switch(config)#aggregator group 1 3,1,2
		a port list separate by a	nolacp
		comma(ex.2, 3, 6)
			switch#show aggregator 1
		Show the information of	or
show aggregator	P		switch#show aggregator 2
		trunk group
			or
			switch#show aggregator 3
no aggregator lacp	G	Disable the LACP function	switch(config)#no aggreator lacp 1
[GroupID]		of trunk group
no aggregator group	G	Remove a trunk group	switch(config)#no aggreator group 2
[GroupID]