Allied Telesis AT-IFS802SP manual Port ID, Words, Sec

AT-IFS802SP-80 User Manual 91

802.1x Commands Set

Netstar Commands	Level	Description	Example
		Use the 802.1x global
8021x enable	G	configuration command to	switch(config)# 8021x enable
		enable 802.1x protocols.
		Use the 802.1x
8021x system radiusip	G	system radius IP global	switch(config)# 8021x system radiusip
[IP address]		configuration command to	192.168.1.1
		change the radius server IP.
		Use the 802.1x system
8021x system		server port global	switch(config)# 8021x system serverport
serverport	G	configuration command to
			1812
[port ID]		change the radius server
		port
		Use the 802.1x system
accountport	G	account port global	switch(config)# 8021x system accountport
[port ID]		configuration command to	1813
		change the accounting port
8021x system		Use the 802.1x system
		share key global	switch(config)# 8021x system sharedkey
sharedkey	G
		configuration command to	123456
[ID]
		change the shared key value.
		Use the 802.1x system
8021x system nasid	G	nasid global configuration	switch(config)# 8021x system nasid test1
[words]		command to change the
		NAS ID
		Use the 802.1x misc quiet
8021x misc		period global configuration
quietperiod	G	command to specify the	switch(config)# 8021x misc quietperiod 10
[sec.]		quiet period value of the
		switch.
		Use the 802.1x misc TX
8021x misc txperiod	G	period global configuration	switch(config)# 8021x misc txperiod 5
[sec.]		command to set the TX
		period.
		Use the 802.1x misc supp
8021x misc	G	timeout global configuration	switch(config)# 8021x misc supptimeout
supptimeout [sec.]		command to set the	20
		supplicant timeout.
		Use the 802.1x misc server
8021x misc	G	timeout global configuration	switch(config)#8021x misc servertimeout
servertimeout [sec.]		command to set the server	20
		timeout.