Allied Telesis AT-IFS802SP manual State Enable, Disable

AT-IFS802SP-80 User Manual 79

		Set interface output
		bandwidth. Rate Range is
bandwidth out [Value]		from 100 kbps to 102400	switch(config)#interface fastEthernet 2
		kbps or to 256000 kbps for	switch(config-if)#bandwidth out 100
		giga ports and zero means
		no limit.
show bandwidth	I	Show interfaces bandwidth	switch(config)#interface fastEthernet 2
		control	switch(config-if)#show bandwidth
		Use the state interface
		configuration command
State [Enable		to specify the state mode	switch(config)#interface fastEthernet 2
	I	of operation for Ethernet
Disable]			switch(config-if)#state Disable
		ports. Use the disable form
		of this command to disable
		the port.
show interface		show interface configuration	switch(config)#interface fastEthernet 2
	I		switch(config-if)#show interface
configuration		status	configuration
show interface status	I	show interface actual status	switch(config)#interface fastEthernet 2
			switch(config-if)#show interface status
show interface	I	show interface statistic	switch(config)#interface fastEthernet 2
accounting		counter	switch(config-if)#show interface accounting
no accounting	I	Clear interface accounting	switch(config)#interface fastEthernet 2
		information	switch(config-if)#no accounting